User`s guide

330 XgOS User’s Guide • September 2014
The qualifiers for the set system management-interface command are
available as individual commands also. For example, the set system address
is the equivalent of the set system management-interface -address
command.
However, by using the set system management-interface command, you
have the following distinct advantages:
You can see all the relevant parameters in one location, which facilitates
completing the management interface’s configuration.
You can string as many of the qualifiers together into one command, which
typically leads to less typing and a quicker time configuring the management
interface.
For example, you can set or change the management interface’s IP address as well
as change the domain in which the Oracle Fabric Interconnect exists, and also
rename the Oracle Fabric Interconnect in one command instead of three (in
previous releases):
6. (Optional) When you are done with setting or changing the management
interface, verify that the new information is active.
For example:
The output indicates that the current IP address is now 192.168.10.97.
set system management-interface -address 192.168.10.97
-domain poclab.xsigo.com -hostname pubstest
show system info
-----------------------------------------------------------------
hostname pubstest
domain poclab.xsigo.com
address 192.168.10.97
netmask 255.255.255.0
nameservers 10.10.0.12, 10.10.0.11
model-num F1-15-CH-SDR
serial-num 160610550
ipconfig static
default-gateway 172.16.6.1
timezone GMT
domain-search
is-sm true
console-speed 115200
phone-home true
root-ssh-login enabled
-----------------------------------------------------------------
1 record displayed