User`s guide

328 XgOS User’s Guide • September 2014
Setting the Oracle Fabric Interconnect
Management IP Address
To use the Oracle Fabric Interconnect’s management interface remotely, you must
configure an IP address and prefix length for the interface. You initially configure
these parameters when you first run the installation wizard at the console port. If
you have changes to your management network, you might need to change the IP
address you use for the Oracle Fabric Interconnect.
▼ Set or Change the Management Address of the
Oracle Fabric Interconnect
1. (Optional) Use show system info to check the current setting.
For example:
2. The output indicates that the current IP address is 192.168.10.85.
3. If other administrators might be managing virtual I/O, use show login to
check if anyone is logged on:
show system info
-----------------------------------------------------------------
hostname myserver
domain samples.xsigo.com
address 192.168.10.85
netmask 255.255.255.0
nameservers 10.10.0.12, 10.10.0.11
model-num F1-15-CH-SDR
serial-num 160610550
ipconfig static
default-gateway 172.16.6.1
timezone GMT
domain-search
is-sm true
console-speed 115200
phone-home true
root-ssh-login enabled
-----------------------------------------------------------------
1 record displayed