User`s guide

Chapter 16 Monitoring XgOS 307
Displaying System Statistics
The system collects real-time statistics, which are displayed whenever you issue a
show <xyz> stats command. Real-time statistics can be cleared at any time.
Syntax
Real-time statistics are available through the following commands:
Example: Display vNIC Status
If a statistic is not available on a specific I/O hardware card, a question mark (?) is
displayed:
DiagService iop 14 WARNING 4
ProcessMonitor iop 14 INFO 6
42 records displayed
show vnic <name> [igmp-stats|multicast-statsqueue-stats|vnic-stats]
show vhba <name> stats
set vnic <name> clear [igmp-stats|vnic-stats]
set vhba <name> clear stats
show vnic vn0.sp2 vnic-stats
----------------------------------------------------------------------
name vn0.sp7
vlan-id-or-none ?
rcv-pkt 43544
rcv-bytes 4267274
trans-pkt 43507
trans-bytes 4265073
invalid-ip-checksum 0
invalid-l4-checksum 0
mtu-err 0
ipchecksum-pkt 0
tcp-checksum-pkt 0
udp-checksum-pkt 0
tcpseg-pkt 0
green-pkt 43519
yellow-pkt 0