User`s guide

Chapter 16 Monitoring XgOS 303
log [debug|syslog] Displays the logs. The show system log and show system
log debug commands are interactive, and do not return
to a command prompt after they have been issued.
You must enter input to manipulate the command output
(for example, pause or resume output), or exit the log file
and return to the command prompt. If you do not
provide any input, the system show log or system show
log debug output is displayed indefinitely.
Use one of the qualifiers to return to the command
prompt:
• h for this list of qualifiers
• q - quit
• f - enter filter
• p - pause/resume
• - to skip backward a little through the file
• + to skip forward a little through the file
• / (forward slash) to search backwards through the log
for a string
• Enter key to mark a position on the screen
If there are no log entries, you will see the message “Log
file /log/user-debug.log is empty,” but you are
still required to provide input to return to the XgOS
command prompt.
loglevel Displays the Syslog level of all services. The levels are as
follows:
• 0 XG_LOG_EMERG
• 1 XG_LOG_ALERT
• 2 XG_LOG_CRIT
• 3 XG_LOG_ERR
• 4 XG_LOG_WARNING
• 5 XG_LOG_NOTICE
• 6 XG_LOG_INFO
• 7 XG_LOG_DEBUG
next-boot Displays the location from which the system will boot
next time.
processes Displays process information.
server-connection Displays server connection information.
status Displays information on the status of the system.
syslog Displays entries.
syslog-server Displays the Syslog server.
Parameter Description