User`s guide

Chapter 16 Monitoring XgOS 295
Optional Qualifiers
Internet Connection Requirement
The Xsigo ProWatch data is transmitted as an HTTP POST transfer. For the transfer
to be successful, the Oracle Fabric Interconnect must be able to open an outgoing
Parameter Description
-contact-email-address Specifies an email address for a person who Oracle technical
support can contact if it appears that the Oracle Fabric Interconnect
needs attention.
-contact-phone-numbers Specifies one or more comma-separated telephone numbers for
Oracle technical support to contact if it appears that the Oracle
Fabric Interconnect needs attention.
-copy-url Specifies a URL internal to your data center where the ProWatch
feature can place a copy of the data for audit. When data is copied
to your internal location, it is not encrypted.
-customer-name Specifies the name of the Oracle customer. Enter a name that
identifies your account with Oracle. Typically, this is your
company’s name.
-frequency Specifies the interval between ProWatch report. One of:
• daily
• weekly (this is the default setting)
• monthly
• when major or critical alarms occur
-noconfirm Is an optional qualifier that controls whether a confirmation
message is displayed when you use the Xsigo ProWatch in
on-demand mode. Enter true or false.
-notify Specifies whether Oracle technical support should contact persons
in the -contact-email-address and
-contact-phone-numbers values when problems are detected.
Enter true or false.
-send-alarms Specifies whether to send major alarms to Oracle technical support.
For details of this modifier, see “Sending ProWatch Data When
Alarms Occur” on page 296. Enter true or false.
-strip-private Specifies whether to strip company private data, such as IP
addresses, from the report that is sent. By default, this option is set
to true. Enter true or false.
set server-profile {*|<name>}
-phone-home-enabled
Allows enabling and disabling ProWatch for individual Server
Profiles. The global state of ProWatch is not affected when ProWatch
is enabled, disabled, or reset to default on a per-Server Profile basis.