User`s guide

Chapter 16 Monitoring XgOS 293
ProWatch Command Syntax
ProWatch Parameter Descriptions
As always when working with the CLI, enclose values in quotation marks if they
include spaces or equals signs (=).
system phone-home [-noconfirm]
set system phone-home disable
set system phone-home enable
set system phone-home noproxy
set system phone-home proxy <hostname> {<port-number>|default}
{[<user-name>] [<password>]}
set system phone-home snooze <minutes>m|<hours>h|<days>d|off
set system phone-home -contact-email-address=<string>|none
set system phone-home -contact-phone-numbers=<string>|none
set system phone-home -copy-url=<string>|none
set system phone-home -customer-name=<string>
set system phone-home -frequency={daily|monthly|weekly|alarms_only}
set system phone-home -notify={default|false|true}
set system phone-home -send-alarms={default|false|true}
set system phone-home -strip-private={default|false|true}
show system phone-home
set server-profile {*|<name>} -phone-home-enabled=[default] [true] [false]
Parameter Description
default Sets the parameter to its default value:
• For the proxy option, default causes Xsigo ProWatch
communication to occur on port 3128.
• For the -notify qualifier, default causes no notification when
Xsigo ProWatch communication occurs.
• For the -strip-private qualifier, default causes the IP
addresses to be removed from the Xsigo ProWatch information
and replaced with a <privip:x> string—for example, <privip:1>
<privip:2> and so on.
<hostname> Specifies the hostname or IP address for the proxy server that will be
sending ProWatch information.
<port-number> For the proxy option, enables specifying a particular TCP port on
which the Xsigo ProWatch information is transmitted.
You can specify default, which sets the TCP port to 3128. Valid
port numbers are in the range of 80 to 65535.