User`s guide

Chapter 16 Monitoring XgOS 275
Replace <IPaddress> with the IP address of the system where you are going to
receive SNMP traps.
Note – Trap IDs are not sequential because they use the virtual resource id (VID).
Removed virtual resources will leave gaps in the VID sequence.
MIB Support
The Xsigo MIB files are available on the Oracle Fabric Interconnect through the
standard admin user login. Xsigo MIBs are available in
/opt/xsigo/xsigos/mibs. To use the Xsigo MIBs, load all MIBs in this directory.
The following MIBs are supported:
■ IF.mib is Xsigo Systems’ implementation of the standard MIBs.
■ XSIGO-IODIRECTOR-ENTITY-MIB is the Xsigo Systems enterprise entity MIB.
■ XSIGO-COMM-MIB is the Xsigo Systems common object MIB.
■ XSIGO-IODIRECTOR-TRAP-MIB defines the Xsigo Systems common trap objects.
The traps themselves are in the entity MIB.
The Xsigo Enterprise MIB identifier is 24440.
IF-MIB
The following tables return valid values for SNMP queries:
■ ifXTable—64-bit counters, object ID 1.3.6.1.2.1.31.1.1.1
■ ifTable—32-bit counters, object ID 1.3.6.1.2.1.2.2.1
The following table lists statistic available in the ifXTable.
IF Attribute vNIC vHBA ethPort fcPort ibPort
ifHCInOctets y yyyy
ifHCInUcastPkts y y
ifHCInBroadcastPkts y
ifHCOutOctets y yyyy
ifHCOutUcastPkts y
ifHCOutBroadcastPkts y