User`s guide

256 XgOS User’s Guide • September 2014
4. If you need to give everyone under in a particular group administrative access,
assign that group to administrators group.
Example: Active Directory Server With Default
Authentication
This example shows how to configure an AD server with simple (default)
authentication. The example takes advantage of the default settings for the port
(389), the -domain-represented-by option (group), the server mode (primary)
and the authentication type (simple).
add ims ad-server AD sfcorpdns1.xsigo.com [e-mail] "DC=XSIGO,DC=COM"
New password:
New password again:
show ims ad-server AD
---------------------------------------------------------------------------
name AD
descr
host-name host-name.xsigo.com
state up/indeterminate
authentication-type simple
server-mode primary
---------------------------------------------------------------------------
show ims ad-server AD -detail
---------------------------------------------------------------------------
name AD
descr
host-name host-name.xsigo.com
port 389
state up/indeterminate
error
user-dn [e-mail]
base-dn DC=XSIGO,DC=COM
server-mode primary
formal-user-dn
domain-represented-by group
authentication-type simple
kerberos-default-realm
kerberos-default-domain
kdc-host-name
kdc-port-num
---------------------------------------------------------------------------