User`s guide

210 XgOS User’s Guide • September 2014
■ Using ACLs with SAN QoS
■ Automatic calculation on SAN QoS for CBS and PBS
■ Ingress vs egress direction control
Commands
QoS shaping services can be applied to FC cards by using add qos san and set
qos san.
Syntax
Parameter Description
add qos san <policy-name> [-noconfirm]
set qos san <policy-name> [-descr=”text”] [-cir=<value>] [-pir=<value>]
[-cbs=<value>] [-pbs=<value>]
set vhba <vhba-name> -qos=<name>
show qos san [<policy-name>]
Parameter Description
add qos san <policy-name> Creates a named QoS shaping policy.
set qos san <policy-name> -cir=<value>
-pir=<value> -cbs=<value> -pbs=<value>
Configures any number of shaping-policy values.
The values are optional. You can configure a SAN shaping
service without setting any values and default SAN
shaping-policy values are applied. If you specify values,
by default CIR and PIR are Mbps and CBS and PBS are
MB.
set vhba <vhba-name> qos <policy-name> Binds the policy to a vHBA.
show qos san <policy-name> Displays all configured SAN shaping services or the SAN
shaping service that is to a specific vHBA.