User`s guide

Chapter 10 Network QoS for vNICs 195
QoS Feature Matrix
The following table describes the network QoS features supported Oracle Fabric
Interconnect’s Gigabit Ethernet I/O modules.
Note – 802.1p priority mapping is supported, but all queues currently have the
same priority. Also, for the 10-Port Gigabit Ethernet module, do not assign more
than 16 vNICs per port. Assigning more than 16 vNICs per port causes multiple
vNICs to be assigned to the same traffic queue, which results in non-deterministic
application of the Network QoS Policer.
QoS Default Sets
XgOS provides a default set of QoS profiles as a configuration convenience to you.
When configuring default QoS Set profiles, the general QoS configuration approach
is as follows:
1. Define a QoS default set
2. Specify a profile within the set
3. Associate the profile to a vNIC and specify a traffic direction (ingress or egress).
Feature
10-Port Gigabit
Ethernet Module
10GbE Module (1
port)
Ingress and egress policing Yes Yes
802.1p mapping
*
* See the “mark” option in “Setting Actions” on page 214.
Yes Yes
IP TOS mapping Yes Yes
DSCP mapping Yes Yes
Assigning sets to a card Yes Yes