User`s guide

Chapter 8 Virtual Host Bus Adapters (vHBAs) 175
Syntax
Example
To determine if LUN masking is enabled for a vHBA, see the “l” value under
“flags”. This filed means LUN masking is enabled:
Use -no-lun-masking to disable LUN masking on a newly added vHBA:
When LUN Masking is disabled, the CLI prevents you from assigning any LUN
masking setting:
add vhba <name>.<server> [<wildcard>] <slot>/<port> -no-lun-masking
add vhba bar.myserver 1/2
show vhba bar.myserver -detail
-----------------------------------------------------------------
name bar.myserver
state up/resourceUnavailable
fabric-state indeterminate
descr
if 1/2
if-state down
wwnn 50:01:39:71:00:00:81:01
wwpn 50:01:39:70:00:00:81:01
luns-per-target 256
cmds-per-lun 8
map
lun-mask
flags --l
local-id 0
add vhba bar.myserver 1/1 -no-lun-masking
add vhba vhba888.titan 4/1 -no-lun-masking
set vhba vhba888.titan -lun-mask=oneida1
Commit failed: Please enable Lun Mask before setting Lun Mask (error 118)