User`s guide

168 XgOS User’s Guide • September 2014
You can also display vHBA statistics for multiple vHBAs through the use of the
<wildcard> option (for example show vhba <wildcard> stats command.
Fibre Channel Monitoring
Use show fc-port to display Fibre Channel port information. Use set fc-port
to control the Fibre Channel port settings. See “Set FC Port Attributes” on page 153.
Syntax
Example
dqp-ib-remote-disconnect-err-count 0
-----------------------------------------------------------------
1 record displayed
show fc-port
show fc-port {*|<slot>/<port>} [-detail]
show fc-port {*|<slot>/<port>} [alarms] [qos] [stats] [vhbas] [-detail]
show fc-port
name type state descr wwnn wwpn vhbas
-----------------------------------------------------------------
8/1 sanFcPort up/up 50:01:39:71:00:00:80:49 50:01:39:70:00:00:80:49 0
show fc-port 8/1 -detail
----------------------------------------------------------
name 8/1
type sanFcPort
state up/up
descr for Pubs testing
wwnn 50:01:39:71:00:00:80:47
wwpn 50:01:39:70:00:00:80:47
rate auto/0
frame-size 2048/2048
exec-throttle 65535
int-delay 1000
fc-link-down-timeout 20
login-retry 8
login-timeout 4