User`s guide

Chapter 8 Virtual Host Bus Adapters (vHBAs) 145
5. Bind the named server profile to a physical connection:
6. Bind the vHBA to a physical slot/port:
At this point, the vHBA is bound to the persistent map named “mymap.” When
this vHBA finds its targets, the vHBA sends target information to the host along
with the target order. The host driver receives the target information and
propagates it up to the OS based on entry order in the map.
7. Check the targets of the newly bound vHBA:
This command will not list the targets by the order specified in the persistent
mapping. If you want to verify this order, you need to check the host side.
3=21:00:00:20:37:90:88:90
4=21:00:00:20:37:C6:5E:B4
5=21:00:00:20:37:CC:EB:30
6=21:00:00:20:37:D5:37:18
7=21:00:00:20:37:8D:03:7D
1 record displayed
set server-profile myserver connect ceasar@iowa:ServerPort13
set vhba vhba101.myserver -if=1/1
show vhba vhba101.myserver targets
vhba name wwnn wwpn luns
------------------------------------------------------------------------------
vhba101.myserver 20:00:00:20:37:8D:03:7D 21:00:00:20:37:8D:03:7D 0
vhba101.myserver 20:00:00:20:37:D5:37:18 21:00:00:20:37:D5:37:18 0
vhba101.myserver 20:00:00:20:37:CC:EB:30 21:00:00:20:37:CC:EB:30 0
vhba101.myserver 20:00:00:20:37:C6:5E:B4 21:00:00:20:37:C6:5E:B4 0
vhba101.myserver 20:00:00:20:37:90:88:90 21:00:00:20:37:90:88:90 0
vhba101.myserver 20:00:00:20:37:B3:F0:5C 21:00:00:20:37:B3:F0:5C 0
vhba101.myserver 20:00:00:20:37:D5:45:FD 21:00:00:20:37:D5:45:FD 0
vhba101.myserver 20:00:00:20:37:C9:1D:C2 21:00:00:20:37:C9:1D:C2 0
8 records displayed