User`s guide

140 XgOS User’s Guide • September 2014
vHBA Attributes
Additional options are available for a vHBA through the set vhba command.
These options allow for more customization of the vHBA than the basic
configuration documented in the previous section.
Syntax
For information about displaying SAN QoS for a vHBA, see “SAN QoS for vHBAs”
on page 209.
Parameter Description
set vhba <vhba-name>.<profile-name> [<wildcard>] -descr=<text>
-fabric-link-down-timeout={<value>|default} -if={<slot/port>|none}
-lun-mask={<lun-mask>|none} -qos={<qos-profile-name>|none}
show vhba <vhba-name>.<profile-name> [<wildcard>] alarms [-detail]
show vhba <vhba-name>.<profile-name> [<wildcard>] errors [-detail]
show vhba <vhba-name>.<profile-name> [<wildcard>] qos [-detail]
show vhba <vhba-name>.<profile-name> [<wildcard>] stats [-detail]
show vhba <vhba-name>.<profile-name> [<wildcard>] throughput
show vhba <vhba-name>.<profile-name> [<wildcard>] warnings [-detail]
Parameter Description
-descr=<text> Applies a text description to the vHBA. Quotes are
required around multiple words containing spaces in
between.
-detail An optional modifier that allows displaying detailed
information (if available) for the vHBA.
-fabric-link-down-timeout Sets a value in milliseconds for the InfiniBand fabric to
be down before the vHBA is put in operational state
“down”. Set a value between 0 and 255. The default is 0,
which can be set through the number zero (0) or
through the keyword default.