User`s guide

116 XgOS User’s Guide • September 2014
3. Check the detailed vNIC configuration to verify that Receive Batching is
configured.
For example:
4. Check the flags field for B, which indicates that Receive Batching is enabled
for the vNIC.
show vnic pubstest.foo -detail
-----------------------------------------------------------------
name pubstest.foo
state up/resourceUnavailable
mac-addr 00:13:97:0F:20:90
admin-ipaddr
oper-ipaddr
descr
if 14/4
if-state down
mcast-group
type
mtu 1500
group
group-pref
ha-state
flags ------B
vlans none
access-vlan 1
mode access
queue-map-type disabled
qos --
local-id 0
mirror
community-name
allowed-vlans 1-4095
-----------------------------------------------------------------
1 record displayed