User`s guide

Chapter 6 Virtual Network Interface Cards (vNICs) 113
enabled for TSO to function. Because TSO is configured at vNIC creation time, you
cannot disable this feature through runtime on the Oracle Fabric Interconnect. If you
want to disable TSO, you must delete the vNIC and recreate it without the -tso
flag.
1. On a Oracle Fabric Interconnect, if a Server Profile does not already exist for
the vNIC, create one now.
2. Add the vNIC with TSO enabled. For example:
When TSO is enabled, large chunks of TCP data that the host transmits over a
vNIC will be segmented on the I/O module before being transmitted to the
network.
3. Check the detailed vNIC configuration to verify that TSO is configured.
For example:
add vnic pubstest.foo 14/4 -tso=true
show vnic pubstest.foo -detail
-----------------------------------------------------------------
name pubstest.foo
state up/resourceUnavailable
mac-addr 00:13:97:0F:20:90
admin-ipaddr
oper-ipaddr
descr
if 14/4
if-state down
mcast-group
type
mtu 1500
group
group-pref
ha-state
flags --ct---
vlans none
access-vlan 1
mode access
queue-map-type disabled
qos --
local-id 0
mirror
community-name
allowed-vlans 1-4095
-----------------------------------------------------------------
1 record displayed