User`s guide

94 XgOS User’s Guide • September 2014
Example: Watch an Ethernet Port
In the following example, the watch command is issued against Ethernet port 1 on
the module in slot 14.
Maximum Transmission Unit
The maximum transmission unit (MTU) is the largest physical packet size (in bytes)
that a network can transmit. MTU values are only applicable to Ethernet ports, and
the MTU of the I/O port must match the MTU of the neighboring switch.
Syntax
ha-state
local-id 0
type hostManaged
vlans none
qos --
flags ---t---
-----------------------------------------------------------------
2 records displayed
watch ethernet-port 14/1
Ethernet Ports measured in bytes Wed Jul 13
name type state v-res in in-rate out out-rate in-stats out-stats
---------------------------------------------------------------------------
14/1 nwEthernet1GbPort up 9 207.578G 0 240.592G 0/0/0/0 0/0/0
1 record displayed
q: quit, r: refresh, b: bytes, p: pkts, %: percent, m: mbps, u: up, d:
set ethernet-port <slot>/<port> -mtu=<value> [-flowcontrol {default|true|false}]
set ethernet-port <slot/port> {down|up}
show ethernet-port {*|<slot>/<port>}
show ethernet-port alarms [-detail]
show ethernet-port qos [-detail]
show ethernet-port stats
show ethernet-port vnics [-detail]