User`s guide

Chapter 6 Virtual Network Interface Cards (vNICs) 85
f. Configure the vNIC as the primary vNIC of the HA pair.
g. Select “-primary”, then press Enter.
This command set created a vNIC (haNIC1), assigned it to a server profile
(vserver1), bound it to a physical slot/port (6/1), and specified the vNIC as
the primary vNIC in a high-availability vNIC pair.
h. Retrieve the MAC address of the primary vNIC.
2. Log into the second Oracle Fabric Interconnect chassis.
a. Create a second vNIC.
Add a second vNIC, give it the same name as the primary vNIC (“haNIC1”),
and assign it to the same server profile as the primary vNIC (“vserver1”).
add vnic haNIC1.vserver1 6/1 ha -primary
show vnic haNIC1.vserver
------------------------------------------
name haNIC1.vserver1
state resourceUnavailable
mac-addr 00:13:97:01:80:01
ipaddr
descr
if 6/1
mcast-group
type
mtu 1500
group haNIC1.vserver1
group-pref primary
flags
vlans none
------------------------------------------
add vnic haNIC1.vserver1 ?
Possible completions:
6/1 nwEthernet1GbPort in slot 6 port 1 (down)
6/2 nwEthernet1GbPort in slot 6 port 2 (down)
6/3 nwEthernet1GbPort in slot 6 port 3 (down)
6/4 nwEthernet1GbPort in slot 6 port 4 (down)
6/5 nwEthernet1GbPort in slot 6 port 5 (down)
6/6 nwEthernet1GbPort in slot 6 port 6 (down)
6/7 nwEthernet1GbPort in slot 6 port 7 (down)
6/8 nwEthernet1GbPort in slot 6 port 8 (down)
6/9 nwEthernet1GbPort in slot 6 port 9 (down)
6/10 nwEthernet1GbPort in slot 6 port 10 (down)
8/1 nwEthernet1GbPort in slot 8 port 1