User`s guide

82 XgOS User’s Guide • September 2014
2. Bind the vNIC to a physical Ethernet card.
3. Select the slot/port that you want to link to the vNIC (in this example, “6/1”):
4. Specify the primary vNIC of the high-availability pair by selecting ha.
The first vNIC created and designated as ha automatically becomes the primary
vNIC of the pair:
5. Bind the secondary vNIC to a physical Ethernet card.
6. Select the slot/port that you want to link to the secondary vNIC (in this
example, “6/3”), then press Enter.
8/5 nwEthernet1GbPort in slot 8 port 5
8/6 nwEthernet1GbPort in slot 8 port 6
8/7 nwEthernet1GbPort in slot 8 port 7
8/8 nwEthernet1GbPort in slot 8 port 8
8/9 nwEthernet1GbPort in slot 8 port 9
8/10 nwEthernet1GbPort in slot 8 port 10
add vnic haNIC1.vserver1 6/1 ?
Possible completions:
ha Specify High Availability characteristics
add vnic haNIC1.vserver1 6/1 ha ?
Possible completions:
6/1 nwEthernet1GbPort in slot 6 port 1 (down)
6/2 nwEthernet1GbPort in slot 6 port 2 (down)
6/3 nwEthernet1GbPort in slot 6 port 3 (down)
6/4 nwEthernet1GbPort in slot 6 port 4 (down)
6/5 nwEthernet1GbPort in slot 6 port 5 (down)
6/6 nwEthernet1GbPort in slot 6 port 6 (down)
6/7 nwEthernet1GbPort in slot 6 port 7 (down)
6/8 nwEthernet1GbPort in slot 6 port 8 (down)
6/9 nwEthernet1GbPort in slot 6 port 9 (down)
6/10 nwEthernet1GbPort in slot 6 port 10 (down)
[Optional qualifiers]
-mac Secondary HA group MAC address
-primary This is a primary HA VNIC
-secondary This is a secondary HA VNIC (need to
specify group MAC address)