User`s guide

Chapter 6 Virtual Network Interface Cards (vNICs) 79
Note – The Oracle Fabric Interconnect automatically assigns MAC addresses to
vNICs from a pool of internal-sequential addresses.
Example: Configure a Server Profile With a vNIC
add server-profile myserver alexander@iowa:ServerPort8
add vnic myvinc.myserver 4/2
set vnic myvinc.myserver -addr-type=static -ip-addr=10.1.1.1/32
show vnic myvinc.myserver
----------------------------------------------------------------
name myvinc.myserver
state up
mac-addr 00:13:97:01:80:08
ipaddr 10.1.1.1/32
descr
if 4/2
if-state up
type static
vlans none
qos --
show ioport 4/2 -detail
----------------------------------------------------------------
name 4/2
type nwEthernet1GbPort
state up/up
descr
rate auto/1Gbps
mtu 1500
avail-in-cir 0Kbps
avail-out-cir 1Gbps
mode access
flags -s-
lag
access-vlan 1
vnics 3
vlans none
-----------------------------------------------------------------
1 record displayed
show vnic myvinc.myserver vnic-stats
----------------------------------------------------------------
name myvinc.myserver
vlan-id-or-none 0
rcv-pkt 0