User`s guide

Chapter 5 Server Profiles and Gateways 75
Note – The gateway’s IP address must be on the same subnet as the vNIC’s address.
5. Associate the default-gateway profile with the server profile:
6. On the hostserver, verify the default gateway and DNS server were pushed to
the hostserver and installed properly:
▼ Change a Gateway’s Configuration
To modify an existing default-gateway profile:
1. Use the none option to disassociate the default-gateway profile with the Oracle
server profile:
2. Note all the gateway options you can change:
name descr addr dns-addr domain-name
-----------------------------------------------------------------
test 10.1.10.112 1.1.1.1 testorg
set server-profile s23 -default-gateway=test
show server-profile s23
name state descr connection
def-gw vnics vhbas
-----------------------------------------------------------------
s23 up/up thorne@connecticut:ServerPort22 test 1 0
cat /etc/resolv.conf
route
ping 10.1.11.112
set server-profile s23 -default-gateway=none
set gateway test ?
Possible completions:
[Optional qualifiers]
-descr Description
-dns IP address of DNS server
-domain-name Internet domain name
-ipaddr IP address of default gateway