User`s manual

VIA KT133 ATX MAINBOARD AWARD BIOS

4-26

4.13 SET SUPERVISOR PASSWORD

Standard CMOS Features Frequency / Voltage Control

Advanced BIOS Features Load Optimized Defaults

Advanced Chipset Features Set Supervisor Password

Integrated Peripherals Set User Password

Power Management Setup Save & Exit Setup

PNP/PCI Configuration Exit Without Saving

PC Health Status

ESC : Quit

 : Select Item

F10 : Save & Exit Setup

Time, Date, Hard Disk Type ...

The “SUPERVISOR PASSWORD” will be used to check the authority when power-on

the PC system. The Supervisor Password will have different function according to the

"Security Option" setup in Section 4.5:

When "Setup" is selected in Security Option:

If you want to change the BIOS setting, you will have to key-in the Supervisor

Password so that you can start the BIOS setup program and change the system

setting..

When "System" is selected in Security Option:

When turn on the PC system, it will request you to enter the Password. Without

the correct password, the PC system will stop and the operation system will not be

loaded.