Specifications

HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock will run at slower
speed while all other devices still operate at full speed.
4
4
-
-
1
1
7
7
B
B
B
I
I
I
O
O
O
S
S
S
S
S
S
e
e
e
t
t
t
u
u
u
p
p
p
Suspend Mode
When enabled, after the set time of system inactivity, all devices except the CPU will be
shut off.
PM Control by APM
When enabled, an Advanced Power Management device will be activated to enhance the
Max. Power Saving mode and stop the CPU internal clock. If Advance Power Management
(APM) is installed on your system, selecting Yes gives better power savings.
Video Off Option
When enabled, this feature allows the VGA adapter to operate in a power saving mode.
Always On Monitor will remain on during power saving modes.
Suspend --> Off Monitor blanked when the systems enters the
Suspend mode.
All Modes --> Off Monitor blanked when the system enters any power
saving mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to the
video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Support
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video
Electronics Standards to select video power management
values.