Specifications

PENTIUM® PRO PROCESSOR AT 150, 166, 180, and 200 MHz E
96
8.6.6.3. Jumper Configuration
End user configured jumpers are not recommended.
If design requires jumpers or switches to upgrade the
system, a detailed jumper description in the manual
is required. The jumpers must be easy to locate and
set. Jumper identification should be silk-screened on
the motherboard if possible. Jumper tables on the
inside of the system case are recommended.
8.6.6.4. BIOS Changes
BIOS changes or additional software must not be
required to upgrade the system with the OverDrive
processor.
8.6.6.5. Documentation
The system documentation must include installation
instructions, with illustrations of the system, Socket 8
and Header 8 location, and any heatsink clip’s
operation and orientation instructions. Furthermore,
there must be no documentation anywhere stating
that the warranty is void if the OEM processor is
removed.
8.6.6.6. Upgrade Removal
The upgrade process must be reversible such that
upon re-installation of the original CPU, the system
must retain original functionality and the cooling
solution must return to its original effectiveness.