Specifications

E PENTIUM® PRO PROCESSOR AT 150, 166, 180, and 200 MHz
37
4.1. System Specification
Figure 22 shows a typical system that a GTL+ device
would be placed into. The typical system is shown
with two terminations and multiple transceiver agents
connected to the bus. The receivers have differential
inputs connected to a reference voltage, V
REF
, which
is generated externally by a voltage divider.
Typically, one voltage divider exists at each
component. Here one is shown for the entire
network.
Figure 22. Example of Terminated Bus with GTL+ Transceivers