User guide

ManualsBrandsAMD ManualsGraphics CardsH685FN1GD

The following table shows some examples of multiple display configurations; (A)

indicates an active adapter is used and (P) indicates a passive adapter is used. Display

abbreviations are mDP = Mini DisplayPort, dDVI = dual-link DVI, sDVI = single-link DVI.

Table 4–2 Sample Display Configurations

Sample Display

Configuration

DVI-D

Connector

mDP

Connector

mDP

Connector

HDMI

Connector

DVI-I

Connector

Total

Output

6×mDP - Native (×6) - - - 6

DVI, 2×mDP,

2×mDP, DVI

Native Native (×2) Native (×2) - Native 6

2×mDP, VGA,

HDMI, VGA

- Native (×2) mDP to VGA

(A)

Native DVI to VGA 5

DVI, 2×mDP,

HDMI, DVI

- mDP to dDVI

(A)

Native (×2) Native Native 5

DVI, HDMI, mDP,

HDMI

Native mDP to sDVI

(A)

Native Native - 4

DVI, mDP, mDP,

VGA

Native Native Native - DVI to VGA 4

DVI, DVI, DVI Native - DP to DVI (A) - Native 3

DVI, DVI, VGA Native mDP to sDVI

(A)

- - DVI to VGA 3

For additional configuration information, visit http://www.amd.com/eyefinity.

Once displays are connected to the graphics card, you can change how your displays

are configured using Catalyst Control Center. For more information, see

Chapter 6 Using Catalyst Control Center.

Using Adapters

The following procedure describes how to connect a display to your graphics card

using an adapter.

1. Turn off your computer and display.

2. Plug the adapter into the connection from your AMD Radeon graphics card and

tighten the thumbscrews (if there are any).

3. Connect your display's cable to the adapter and tighten the thumbscrews (if

there are any).

4. Turn on your display first, then your computer.

Use the Catalyst Control Center to configure the new display.

Configuring the Display (Optional)

To change the display configuration or if you are experiencing an issue with the

display, do the following:

Display Configuration 13