User`s guide

Insyde -Confidential- Page
8 of 15
H. Miscellaneous Configuration
The Miscellaneous configuration screen focuses on a variety of functions, Use the () to select the function and
<enter> to change the value
Splash Screen Configuration
Splash Screen: Allows the configuration to have the splash screen displayed or not. The options are
Enabled or Disabled.
Clear Splash Screen: Allows the system to leave the splash screen on until the operating systems clears
the screen. The options are Enabled or Disabled.
Splash Screen Timeout: Sets the time for how long the splash screen is displayed. The time is in
milliseconds and goes from 0 to 65535. Enter the amount and select <enter>.
Summary Screen Configuration
Summary Screen: Allows the summary screen to be either displayed or not on boot. The options are
Enabled or Disabled.
Summary Screen Timeout: Sets the time for how long the summary screen is displayed. The time is in
milliseconds and goes from 0 to 65535. Enter the amount and select <enter>.
Power Button Configuration
Power button: Allows the power button to be configured with ACPI mode or Instant off
PC Speaker Configuration
AC Beeper: Allows the PC speaker to beep. The options are Enabled or Disabled.
I. ISA I/O and Memory Configuration
The ISA I/O and Memory Configuration screen allows the configuration of the I/O ranges mapped to ISA and the
memory ranges mapped to ISA.
I/O Mapped to ISA
I/O Range-0 though I/O Range-5: Allows the I/O range to be Enabled or Disabled.
Size: Selects the I/O range size. It may be set to 1, 2, 4, 8, 16, 32, 64, or 128.
Base Addr (A15-A8) / (A7-A0): Sets the base address for the I/O range.