User`s guide

Insyde -Confidential- Page
11 of 15
C-C LPC Card devices
The LPC card configuration enables the configuration of each serial port and the parallel port on the LPC. To
change the serial port configuration use the arrow keys () to select the serial port and hit <enter> to change the
state. The choices are Disabled, 0x3F8 IRQ 4, 0x2F8 IRQ 3, 0x3E8 IRQ 4, 0x2E8 IRQ3
Serial Port 1-2: Allows the selection of the serial port address and IRQ. The choices are Disabled, 0x3f8 IRQ 4,
0x2f8 IRQ 3, 0x3e8 IRQ 4, and 0x2e8 IRQ 3.
Mode: Allows changing the serial port mode. The options are RS232 and RS485.
Parallel Port: Allows the selection of the parallel port address. The choices are Disabled, 0x378, 0x278, 0x3BC.
Mode: Allows changing the parallel port mode. The options are Compatible, PS/2 Bi-directional, EPP 1.7,
EPP 1.9, and ECP.
IRQ: Allows the configuration of the IRQ for the parallel port. The options are Disabled, IRQ5, IRQ7,
IRQ9, IRQ10, and IRQ11
DMA: Allows the configuration of the DMA for the parallel port. The options are None, Channel 3, and
Channel 1.
C-D. DDMA Channel Configuration
The DDMA Configuration screen allows the configuration of the DMA channels mapped to ISA.
DMA Channel 0-7 to ISA: Allows the DMA channel to be Enabled or Disabled.