LE-366 AMD Geode TM LX800 3.5” Embeded Board User’s Manual Edition 1.
LE-366 User’s Manual Copyright Copyright 2006. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protected by copyright. No part of this document may be reproduced, copied, or translated in any form or any means without prior written permission of the manufacturer.
LE-366 User’s Manual Packing List Please check the package before you starting setup the system.
LE-366 User’s Manual Index Chapter 1 .................................................................... 6 1.1 ...............................................................................6 1.2 .........................................................................7 1.3 ...........................................................................9 1.4 ............................................................
LE-366 User’s Manual A.7 ..........................................................35 Appendix B ................................................................ 37 B.1 BIOS Auto Flash Tool ................................................................37 B.2 Flash Method..............................................................................37 Appendix C ............................................. 38 Appendix D .
LE-366 User’s Manual (The Page is Left For Blank) -5-
LE-366 User’s Manual Chapter 1 1.1 LE-366 is the Mini-ITX motherboard with AMD Geode LX800 platform, with onboard VGA, AC97 audio, GIGA LAN interface. Based on the AMD Geode LX800 processor, the board provides many advanced features for reduced power consumption, fan-less design and high cost/price rate of production. Low Power Consumption Based on the AMD Geode LX800@500MHz processor onboard, it only takes up to 3.
LE-366 User’s Manual 1.2 General Specification Form Factor CPU Memory Chipset BIOS Green Function Watchdog Timer Real Time Clock Enhanced IDE 145 mm x 102 mm (5.7” x 4”) Up to AMD Geode LX 800 Processor One So-DIMM slot support DDR 266/333/400 MHz SDRAM up to 1GB AMD Geode CS5536 Phoenix-Award 4Mb PnP Flash ACPI 1.0 and APM 1.
LE-366 User’s Manual External Audio phone jack for Line-out and MIC-in. Connector Onboard audio connector with pin header Expansive Interface PCI 1 Mini-PCI slot V2.2 33/66 MHz 1 Compact Flash (optional) Power and Environment Power Requirement Temperature 12V DC Jack power connector Operating temperature with 0℃~60℃ (32℉ ~ 140℉) Storage temperature with 20℃~ 80℃ (-68℉ ~ 176℉) Ordering Code LE-366 AMD LX800 processor Mini-ITX with onboard VGA, GigaLAN, RS232, USB2.
LE-366 User’s Manual 1.
LE-366 User’s Manual 1.4 16Mbx16 CRT DDR DIMM AMD Geode LX Processor LVDS PCI BUS/33Mhz IDE X 1 CFD X 1 MiniPCI SLOT RealTek RTL8110SB LAN1 ALC203 AUDIO JACK AMD Geode CS5536 4 x USB2.
LE-366 User’s Manual Chapter 2 2.
LE-366 User’s Manual Jumper JP1 JP2 JP3 J4 J7 Function LVDS Panel Voltage Selection (+5V / + 3.
LE-366 User’s Manual 2.1.
LE-366 User’s Manual 2.2 2.2.1 The board integrates AMD Geode LX800 500MHz processor with special design for power appliance. It requires only 3.8W power consumption at most, and is totally designed for fan-less system. 2.2.2 The board supports one 200-pin DDR266/333/400 SDRAM up to 1GB of capacity, and supports non-ECC unbuffered memory modules.
LE-366 User’s Manual 2.5 The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values.
LE-366 User’s Manual 2.3 The board has one Ultra DMA33 IDE interface to support up to 2 ATAPI devices, and one Compact Flash Type II socket on the solder side.
LE-366 User’s Manual 2.4 The board provides a slim type floppy port; please use the 26-pin FPC cable in the package to connect the floppy device. FDD Floppy rear side 1. 4. Lift up this plastic bar 5. Slot the cable in (Blue paste for outside) 6. Press back the plastic bar Lift up the brown plastic bar 2. Slot the cable in (Blue paste for 3.
LE-366 User’s Manual 2.8 The board integrates AMD Geode LX800 processor with built-in 2D video engine, to provide onboard DB15 VGA connector, 18-bit LVDS interface. The built-in 2D video engine supports following specified functions: ● High-performance 2D graphics controller ● Alpha BLT ● Integrated dot clock PLL 2.4.1 Please connect your CRT or LCD monitor with DB15 male connector to the onboard DB15 female connector on rear I/O port.
LE-366 User’s Manual 2.4.2 The board provides one 30-pin LVDS connector for 18-bit single channel panel, supports up to 1024 x 768 of resolution, with one LCD backlight inverter connector and one jumper for panel voltage setting Connector: JP1 Type: 3-pin Power select Header Pin 1 2 3 Description VCC (5V) LCDVCC VCC3 (3.
LE-366 User’s Manual Connector: CN_LVDS (CN2) (for 18 bit Single channel LVDS panel) Type: 30-pin header (15 x 2 pitch 2.0 mm) Connector model: Hirose DF13-40DP-1.
LE-366 User’s Manual To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight power. 3. A LCD cable and an inverter cable. For the cables, please follow the pin assignment of the connector to make a cable, because every panel has its own pin assignment, so we do not provide a standard cable; please find a local cable manufacture to make cables. LCD Installation Guide: 1. Preparing the LE-366, LCD panel and the backlight inverter. 2.
LE-366 User’s Manual After setup the devices well, you need to select the LCD panel type in the BIOS.
LE-366 User’s Manual Based on AMD CS5536, the board provides 2 x USB2.0 ports. The USB2.0 interface provides up to 480Mbps of transferring rate. Interface USB2.
LE-366 User’s Manual 2.5 The board provides a programmable 8-bit digital I/O interface; you can use this general purpose I/O port for system control like POS or KIOSK. Connector: CN8 Type: onboard 2 x 6-pin header, pitch=2.
LE-366 User’s Manual 2.
LE-366 User’s Manual 2.7 The LE-366 provides a standard ATX power supply with 20-pin ATX connector, and the board provides one 4-pin P4 additional use power connector for internal power supply and one 3-pin cooler fan connector for system. 2.6.1 Connector: ATX Type: 20-pin ATX power connector PIN assignment 1 3.3V 2 3.3V 3 GND 4 5V 5 GND 6 5V 7 GND 8 5V 9 5V 10 12V 11 12 13 14 15 16 17 18 19 20 3.3V -12V GND PS_ON GND GND GND -5V 5V 5V 2.6.
LE-366 User’s Manual 2.7.
LE-366 User’s Manual 2.8 The JFRNT provides front control panel of the board, such as power button, reset and beeper, etc. Please check well before you connecting the cables on the chassis. Connector: CN3 Type: onboard 14-pin (2 x 7) 2.
LE-366 User’s Manual (This Page is Left For Blank) -29-
LE-366 User’s Manual Chapter 3 The motherboard uses the Award BIOS for the system configuration. The Award BIOS in the single board computer is a customized version of the industrial standard BIOS for IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU architecture based processors and computers. The BIOS provides critical low-level support for the system central processing, memory and I/O sub-systems.
LE-366 User’s Manual (This Page is Left for Blank) -31-
LE-366 User’s Manual Appendix A A.
LE-366 User’s Manual A.2 Connector: FDD1 Type: 26-pin connector Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 Assignment VCC VCC VCC N/C N/C N/C DENSEL# GND GND GND GND GND GND Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 Assignment INDEX# DRV_SEL# DSK_CH# N/C MOTOR# DIR# STEP# WDATA# WGATE# TRACK# WOROT# RDATA# SIDE# A.
LE-366 User’s Manual 6 A.4 1 2 3 4 5 Connector: CRT Type: 15-pin D-sub female connector on I/O Panel 11 12 13 14 15 10 Pin 1 2 3 4 5 Description RED GREEN BLUE N/C Ground Pin 6 7 8 9 10 Description Ground Ground Ground VGA_VCC Ground Pin 11 12 13 14 15 Description N/C CRT_DDCDATA HSYNC VSYNC CRT_DDCCLK A.5 Connector: RJ45 Type: RJ45 connector with LED on I/O Panel Pin Description 1 2 3 4 MI0+ MI0- MI1+ MI2+ 5 6 MI2- MI1- 7 8 MI3+ MI3- A.
LE-366 User’s Manual A.
LE-366 User’s Manual (This Page is Left for Blank) -36-
LE-366User’s Manual Appendix B B.1 BIOS Auto Flash Tool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below: http://www.award.com http://www.commell.com.tw/support/support.htm TU UT TU UT File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the BIOS flash ship and update the BIOS. B.2 Flash Method 1. Please make a bootable floppy disk. 2. Get the last .
LE-366 User’s Manual Appendix C C1.
LE-366 User’s Manual -39-
LE-366 User’s Manual C2.
LE-366 User’s Manual C3.
LE-366 User’s Manual Appendix D The GPIO can be programmed with the MSDOS debug program using simple IN/OUT commands. The following lines show an example how to do this. GPIO0...
LE-366 User’s Manual Appendix E The watchdog timer makes the system auto-reset while it stops to work for a period. The integrated watchdog timer can be setup as system reset mode by program.
LE-366 User’s Manual (This Page is Left for Blank) -44-
LE-366 User’s Manual Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business. Taiwan Commate Computer Inc. Address 8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih Taipei Hsien, Taiwan TEL +886-2-26963909 FAX +886-2-26963911 http://www.commell.com.tw Website TU UT info@commell.com.tw (General Information) E-Mail TU UT tech@commell.com.
