Specifications

BIOS Setup
56
Chipset Features Setup
Figure 4: Chipset Features Setup
•
••
•
Top Performance
If you wish to maximize the performance of your system, set “Top Performance”
as “Enabled”.
Disabled Top Performance Disable.
(Default Value)
Enabled Top Performance Enable.
•
••
•
DRAM Frequency
Auto Set DRAM Frequency to Auto.
100MHz Set DRAM Frequency to 100MHz.
(Default Value)
133MHz Set DRAM Frequency to 133MHz.
•
••
•
SDRAM CAS# Latency
2 For Fastest SDRAM DIMM module.
3 For Slower SDRAM DIMM module.
(Default Value)
Auto Detect SDRAM CAS# Latency by SPD.
AMIBIOS SETUP – CHIPSET FEATURES SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
*********DRAM Timing*** SDRAM Command Drive 24 mA
Top Performance Disabled Memory Address Drive 24 mA
DRAM Frequency 100MHz CAS# Drive 12 mA
SDRAM CAS# Latency 3 RAS# Drive 24 mA
AGP Fast Write Disabled
AGP Mode 4X
AGP Comp. Driving Auto
Manual AGP Comp. Driving DB
AGP Aperture Size 64MB
PCI Delay Transaction Enabled
USB Controller Enabled
USB Legacy Support Disabled
USB Port 64/60 Emulation Disabled
BIOS Flash Protection Disabled
DRAM Drive Strength Auto
ESC : Quit
↑↓→ ←
: Select Item
MD Bus Strength High F1 : Help PU/PD+/-/ : Modify
CAS Bus Strength High F5 :Old Values (Shift)F2:Color
Delay DRAM Read Latch 1.0ns F6 : Load BIOS Defaults
Memory Data Drive 8 mA F7 : Load SETUP Defaults