User Guide

BIOS Setup
72
Frequency/Voltage Control
Figure 9: Frequency/Voltage Control
•
••
• ClkGen Spread Spectrum
Disabled Disable this function.
Enabled Enable Clock Generator Spread Spectrum function to improve
CE/FCC. (Default value)
•
••
• CPU Host/PCI Clock
The table below is shown only when CPU DIP switch setting is below 133MHz:
Default When CPU Host/PCI Clock setting is set to Default, the clock will
depend on DIP switch setting. (Default value)
100/33Mhz Set CPU Host/PCI Clock to 100/33Mhz.
102/34Mhz Set CPU Host/PCI Clock to 102/34Mhz.
104/35Mhz Set CPU Host/PCI Clock to 104/35Mhz.
108/36Mhz Set CPU Host/PCI Clock to 108/36Mhz.
112/38Mhz Set CPU Host/PCI Clock to 112/38Mhz.
116/39Mhz Set CPU Host/PCI Clock to 116/39Mhz.
118/40Mhz Set CPU Host/PCI Clock to 118/40Mhz.
CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software
Frequency/Voltage Control
ClkGen Spread Spectrum Enabled Item Help
CPU Host/PCI Clock Default
Menu Level
4
↑↓→ ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults