User Guide

BIOS Setup

PnP/PCI Configurations

Figure 7: PnP/PCI Configurations

•

••

• Reset Configuration Data

Disabled Disable this function. (Default value)

Enabled Enable Reset Configuration Data function.

•

••

• Resources Controlled by

Manual User can set the PnP resource (I/O Address, IRQ & DMA channels)

used by legacy ISA DEVICE.

Auto(ESCD) BIOS automatically use these PnP rescuers. (Default value)

•

••

• IRQ (3, 4, 5, 7, 9, 10, 11, 12, 14, 15)

PCI Device The resource is used by PCI device. (Default value)

Reserved Set the resource to reserved.

CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software

PnP/PCI Configurations

Reset Configuration Data Disabled Item Help

Resources Controlled By Auto (ESCD)

Menu Level

X IRQ Resources Press Enter

INT A Assignment Auto

Default is Disabled.

INT B Assignment Auto

Select Enabled to

INT C Assignment Auto

reset Extended System

INT D Assignment Auto

Configuration Data

ESCD) when you exit

Setup if you have

installed a new add-on

and the System

reconfiguration has

caused such a serious

conflict that the OS

cannot boot

↑↓→

←

Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults