User Guide

BIOS Setup
62
•
••
• Onboard Parallel Port
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
•
••
• Onboard Parallel Mode
Normal Normal Setting. (Default value)
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP/EPP Using Parallel port as ECP & EPP mode.
•
••
• ECP Mode Use DMA
3 Set ECP Mode Use DMA to 3. (Default Value)
1 Set ECP Mode Use DMA to 1.
•
••
• Parallel Port EPP Type
EPP 1.9 Set Parallel Port EPP Type to EPP 1.9. (Default value)
EPP 1.7 Set Parallel Port EPP Type to EPP 1.7.
•
••
• Sound Blaster
Enabled Enable Sound Blaster.
Disabled Disable Sound Blaster. (Default Value)
•
••
• SB I/O Base Address
220H Set SB I/O Base Address to 220H. (Default Value)
240H Set SB I/O Base Address to 240H.
260H Set SB I/O Base Address to 260H.
280H Set SB I/O Base Address to 280H.
•
••
• SB IRQ Select
IRQ 5 / 10. (Default Value: 5)
•
••
• SB DMA Select
DMA 0 / 1 / 2 / 3. (Default Value: 1)