User Guide

7DX Motherboard
59
Integrated Peripherals
Figure 5: Integrated Peripherals
This item will only be shown when there is sound chip onboard.
 These two items will be available when ”UART 2 Mode” is set to HPSIR or ASKIR.
 These two items will be available when ”Onboard Parallel Mode” is set to ECP/EPP.
♣ These seven items will not be shown when there is sound chip onboard.
•
••
• OnBoard IDE1
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software
Integrated Peripherals
OnBoard IDE1 Enabled Item Help
OnBoard IDE2 Enabled
VGA Boot from AGP
Menu Level
4

OnBoard Sound Chip Enabled
BIOS Flash Protection Disabled
USB Controller 1 Enabled
USB Controller 2 Enabled
USB Legacy Support Disabled
AC97 Audio Auto
AC97 Modem Auto
Onboard FDD Controller Enabled
Onboard Serial Port 1 Auto
Onboard Serial Port 2 Auto
UART 2 Mode Standard

IR Function Duplex Half

TX, RX inverting enable No, Yes
Onboard Parallel Port 378/IRQ7
Onboard Parallel Mode Normal

ECP Mode Use DMA 3

Parallel Port EPP Type EPP1.9
♣
Sound Blaster
Disabled
♣
SB I/O Base Address
220H
♣
SB IRQ Select
IRQ 5
♣
SB DMA Select
DMA 1
♣
MPU-401
Disabled
♣
MPU-401 I/O Address
330-333H
♣
Game Port (200-207H)
Enabled
↑↓→ ←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults