User Guide

7DX Motherboard

•

••

• DRAM Trc Timing Value

This function specify the minimum time from activate to activate of the same bank.

3 Cycle Set DRAM Trc Timing Value to 3 Cycle.

4 Cycle Set DRAM Trc Timing Value to 4 Cycle.

5 Cycle Set DRAM Trc Timing Value to 5 Cycle.

6 Cycle Set DRAM Trc Timing Value to 6 Cycle.

7 Cycle Set DRAM Trc Timing Value to 7 Cycle.

8 Cycle Set DRAM Trc Timing Value to 8 Cycle.

9 Cycle Set DRAM Trc Timing Value to 9 Cycle.

10 Cycle Set DRAM Trc Timing Value to 10 Cycle.

•

••

• DRAM Trp Timing Value

This function specify the delay from precharge command to activate command.

1 Cycle Set DRAM Trp Timing Value to 1 Cycle.

2 Cycle Set DRAM Trp Timing Value to 2 Cycle.

3 Cycle Set DRAM Trp Timing Value to 3 Cycle.

4 Cycle Set DRAM Trp Timing Value to 4 Cycle.

•

••

• DRAM Tras Timing Value

This function specifies the minimum bank (active time: time from active to precharge of

same bank).

2 Cycle Set DRAM Tras Timing Value to 2 Cycle.

3 Cycle Set DRAM Tras Timing Value to 3 Cycle.

4 Cycle Set DRAM Tras Timing Value to 4 Cycle.

5 Cycle Set DRAM Tras Timing Value to 5 Cycle.

6 Cycle Set DRAM Tras Timing Value to 6 Cycle.

7 Cycle Set DRAM Tras Timing Value to 7 Cycle.

8 Cycle Set DRAM Tras Timing Value to 8 Cycle.

9 Cycle Set DRAM Tras Timing Value to 9 Cycle.

•

••

• DRAM CAS Latency

This function specify the DRAM CAS Latency.

2 Cycle Set DRAM CAS Latency to 2 Cycle.

2.5 Cycle Set DRAM CAS Latency to 2.5 Cycle.