User Guide

7DX Motherboard
19
J7: BIOS Write Protect Function
Pin No. Definition
Close Write Protect Enable
Open Write Protect Disable
(Default)
1

Please set Jumper J7 to “Open”
to enabled BIOS write function when
you update new BIOS or new device.
J8: Front Panel USB Device Wake up Selection (USB Port  USB2)
1
Pin No. Definition
1-2 close
Enable FP USB Device
Wake up
2-3 close
Disable FP USB Device
Wake up (Default)
(If you want to use “
USB Dev Wakeup From S3-S5
” function, you
have to set the BIOS setting “USB Dev Wakeup From S3-S5”
enabled, and the jumper “
J8&J18
” enabled).
*(Power on the computer and as soon as memory counting
starts, press <Del>. You will enter BIOS Setup. Select the
item “
POWER MANAGEMENT SETUP
”, then select “
USB
Dev Wakeup from S3-S5: Enabled
”. Remember to save
the setting by pressing "ESC" and choose the “SAVE & EXIT
SETUP” option.)
USB2