User Guide

Panel and Jumper Definition
18
Panel And Jumper Definition
BAT1: Battery
+
CAUTION

Danger of explosion if battery
is incorrectly replaced.

Replace only with the same or
equivalent type recommended
by the manufacturer.

Dispose of used batteries
according to the manufacturer’s
instructions.
J6: Rear USB Device Wake up Selection (USB Connector

USB1)
Pin No. Definition
1-2 close Rear USB Device Wake up
Enable
2-3 close Rear USB Device Wake up
Disable (Default)
1
(If you want to use “
USB Dev Wakeup from S3-S5
” function, you
have to set the BIOS setting “USB Dev Wakeup from S3-S5”
enabled, and the jumper “
J6&J18
” enabled).
*(Power on the computer and as soon as memory counting
starts, press <Del>. You will enter BIOS Setup. Select the
item “
POWER MANAGEMENT SETUP
”, then select “
USB
Dev Wakeup from S3-S5: Enabled
”. Remember to save
the setting by pressing "ESC" and choose the “SAVE & EXIT
SETUP” option.)
USB1