User`s guide

AR-B1631ET User’s Guide
30/30
void Enter_Config(BYTE IO_PORT_BASE)
{
outportb(IO_PORT_BASE,0x87);
outportb(IO_PORT_BASE,0x87);
}
/*[]=====================================================================[]*/
/*|| Function : Exit_Config() ||*/
/*|| Input : BYTE IO_PORT_BASE ||*/
/*|| Change : - ||*/
/*|| Return : - ||*/
/*|| Description: Exit chip configuration key. ||*/
/*[]=====================================================================[]*/
void Exit_Config(BYTE IO_PORT_BASE)
{
outportb(IO_PORT_BASE,0xAA);
}
/*[]=====================================================================[]*/
/*|| Function : Init_SIO() ||*/
/*|| Input : - ||*/
/*|| Change : - ||*/
/*|| Return : character 'y' or 'n' ||*/
/*|| Description: Confirm get 'Y' or 'N' key. ||*/
/*[]=====================================================================[]*/
void Init_SIO(BYTE IO_PORT_BASE)
{
/* Set Multi-function Pins to GPIO */
outportb(IO_PORT_BASE,0x2A);
outportb(IO_PORT_BASE+1,(inportb(IO_PORT_BASE+1) | 0xFC));
// Select GPIO Port device
outportb(IO_PORT_BASE,0x07);
outportb(IO_PORT_BASE+1,0x07);
// Set GPIO Port Active
outportb(IO_PORT_BASE,0x30);
outportb(IO_PORT_BASE+1,0x01);
}