Specification Sheet

7. 2 x system fan headers
8. 1 x system fan/water cooling pump header
9. 1 x CPU cooler LED strip/RGB LED strip header
10. 2 x digital LED strip headers
11. 2 x digital LED strip power select jumpers
12. 1 x RGB (RGBW) LED strip header
13. 1 x front panel header
14. 1 x front panel audio header
15. 1 x S/PDIF Out header
16. 1 x USB 3.1 Gen 1 header
17. 2 x USB 2.0/1.1 headers
18. 1 x Trusted Platform Module (TPM) header (2x10 pin, for the GC-TPM2.0
module only)
19. 1 x Clear CMOS jumper
 Back Panel Connectors
1. 1 x HDMI port
2. 2 x SMA antenna connectors (1T1R)
3. 1 x DVI-D port
4. 4 x USB 3.1 Gen 1 ports
5. 1 x USB Type-C™ port, with USB 3.1 Gen 2 support
6. 1 x USB 3.1 Gen 2 Type-A port (red)
7. 1 x RJ-45 port
8. 1 x optical S/PDIF Out connector
9. 5 x audio jacks
 I/O Controller
1. iTE
®
I/O Controller Chip
 H/W Monitoring
1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Water cooling flow rate detection
5. Overheating warning
6. Fan fail warning
7. Fan speed control
* Whether the fan (pump) speed control function is supported will depend on the
fan (pump) you install.
 BIOS
1. 2 x 128 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. Support for DualBIOS™
4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
 Unique Features
1. Support for APP Center
* Available applications in APP Center may vary by motherboard model.
Supported functions of each application may also vary depending on motherboard
specifications.