User guide

10. Reconnect any cables you have disconnected and plug in the computer

power cord.

11. Turn on the monitor and then the computer.

The computer should start normally and the software must be installed next.

Install the ATI Catalyst™ Software Suite

To install or remove software, you must have administrator rights or be logged

on as a user with administrator rights.

Note: The installation dialog displays in English if the operating system’s

language is not supported.

Software is provided to both operate and take advantage of all the features of the

graphics card, including:

• Driver.

• ATI Catalyst™ Control Center.

• HydraVision™ (included in the custom install).

• SurroundView™ software (included in the custom install).

• ATI Avivo™ video converter software (included in the custom install).

1. Insert the Installation CD-ROM.

Note: If the install wizard does not start, navigate to the CD drive and

double-click ATISETUP.exe.

2. Follow the on-screen instructions and then select either Express or Custom

Install.

Not all software components are installed using the Express installation.

Custom installation allows you to select individual software components for

installation.

Tip: If the installer fails to install the driver, or you have a software conflict, you

can download the latest software from ati.amd.com/support/driver.html and

then install it.

Display Configuration

This section describes how to configure the display and lists the available display

connections.

Configure the Display (Optional)

If you are not experiencing any troubles with the display, no adjustments are

necessary.

Configure the Display (Optional)

P/N 037-41424-00