User Guide

7VMM Motherboard
61
•
OnBoard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
(Default Value)
3F8/COM1 Enable onboard Serial port 2 and address to 3F8.
2F8/COM2 Enable onboard Serial port 2 and address to 2F8.
3E8/COM3 Enable onboard Serial port 2 and address to 3E8.
2E8/COM4 Enable onboard Serial port 2 and address to 2E8.
Disabled Disable onboard Serial port 2.
•
Serial Port 2 Mode
Normal Normal operation.
(Default Value)
IrDA Onboard I/O chip supports IRDA
ASK IR Onboard I/O chip supports ASK IR.
•
OnBoard Parallel port
378
Set onboard LPT port and address to 378.
278
Set onboard LPT port and address to 278.
3BC
Set onboard LPT port and address to 3BC.
Auto
Set onboard LPT port automatically.
(Default Value)
.
Disabled
Disable this function.
•
Parallel Port Mode
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
(Default Value)
Normal Normal Operation.
•
Parallel Port DMA
3 Set Parallel Port DMA to 3.
1 Set Parallel Port DMA to 1.
0 Set Parallel Port DMA to 0.
Auto Set Parallel Port DMA automatically.
(Default Value)
•
Parallel Port IRQ
7 Set Parallel Port IRQ to 7.
5 Set Parallel Port IRQ to 5.
Auto Set Parallel Port IRQ automatically.
(Default Value)