User Guide

BIOS Setup
60
Integrated Peripherals
Figure 9: Integrated Peripherals
•
OnBoard FDC
Disabled Disable this function.
Enabled Enable onboard floppy disk controller.
Auto Set the floppy disk controller automatically.
(Default Value)
•
OnBoard Serial Port 1
Auto BIOS will automatically setup the port A address.
(Default Value)
3F8/COM1 Enable onboard Serial port A and address is 3F8.
2F8/COM2 Enable onboard Serial port A and address is 2F8.
3E8/COM3 Enable onboard Serial port A and address is 3E8.
2E8/COM4 Enable onboard Serial port A and address is 2E8.
Disabled Disable onboard Serial port A.
AMIBIOS SETUP –INTEGRATED PERIPHERAL
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard FDC :Auto Game Port(200h-207h) :Enabled
OnBoard Serial Port 1 :Auto
OnBoard Serial Port 2 :Auto
Serial Port 2 Mode :Normal
Duplex Mode :N/A
OnBoard Parallel Port :Auto
Parallel Port Mode :ECP
Parallel Port DMA :Auto
Parallel Port IRQ :Auto
OnBoard IDE :Both
OnBoard AC’97 Audio :Auto
OnBoard MC’97 Modem :Auto
OnBoard Legacy Audio :Enabled
Sound Blaster :Disabled
SB I/O Base Address :220h-22Fh
ESC : Quit
↑↓←→
: Select Item
SB IRQ Select : 5 F1 : Help PU/PD/+/- : Modify
SB DMA Select : 1 F5 : Old Values (Shift)F2 :Color
MPU-401 :Disabled F6 : Load Fail-Safe Defaults
MPU-401 I/O Address :330h-333h F7 : Load Optimized Defaults