User Guide

7VMM Motherboard
53
Power Management Setup
Figure 5: Power Management Setup
* This item will be shown only on m/bs with STR function.
** The item "USB Dev Wake-up from S3~S5" will be shown only on m/bs with STR function
•
••
•
ACPI Standby State
S1/POS Set ACPI Standby State is S1
(Default Value)
S3/STR Set ACPI Standby State is S3.
•
••
•
USB Dev Wakeup From S4~S5
Enabled Enable USB Device Wakeup From S4~S5.
Disabled Disable USB Device Wakeup From S4~S5.
(Default value)
•
Suspend Time Out (Minute)
System enters suspend power state when the length of period selected by this optional
has expired.
Disabled Disable the timer to enter suspend mode.
(Default Value)
30Sec ~ 1Hour Set the timer to enter suspend mode.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
*ACPI Standby State S1/POS
RTC Alarm Hour 12
**USB Dev Wakeup From S4~S5 Disabled RTC Alarm Minute 30
Suspend Time Out(Minute) Disabled RTC Alarm Second 30
Display Activity Ignore
IRQ3 Monitor
IRQ4 Monitor
IRQ5 Ignore
IRQ7 Monitor
IRQ9 Ignore
IRQ10 Ignore
IRQ11 Ignore
IRQ13 Ignore
IRQ14
Monitor
IRQ15 Ignore
Soft-Off by Power Button
Instant-Off
System after AC Back
Last State
ESC : Quit
↑↓→ ←
: Select Item
Resume On Ring/LAN Enabled F1 : Help PU/PD+/-/ : Modify
Resume On PME# Enabled F5:Old Values (Shift)F2:Color
Resume On RTC Alarm Disabled F6 : Load Fail-Safe Defaults
RTC Alarm Date 15 F7 : Load Optimized Defaults