User Guide

Panel and Jumper Definition

FUSB_ON: Front USB Device Wake up Selection

(USB Connector

USB2)

Normal

(Default)

Enable

1 1

Pin No. Definition

1-2 close Front USB Device Wake up

Enable

2-3 close Front USB Device Wake up

Disable (Default)

Please note:

(If you want to use “

USB Dev Wakeup from S4~S5

” function, you

have to set the BIOS setting “USB Dev Wakeup from S4~S5” enabled, and the

jumper “

FUSB_ON

”&”

STR_EN

” enabled).

*(Power on the computer and as soon as memory counting starts, press <Del>.

You will enter BIOS Setup. Select the item “POWER MANAGEMENT SETUP”,

then select “USB Dev Wakeup from S3~S5: Enabled”. Remember to save the

setting by pressing "ESC" and choose the “SAVE & EXIT SETUP” option.)

BAT1: Battery

CAUTION

Danger of explosion if battery

is incorrectly replaced.

Replace only with the same or

equivalent type recommended

by the manufacturer.

Dispose of used batteries

according to the manufacturer’s

instructions.