User Guide

Panel and Jumper Definition

RUSB_ON: Rear USB Device Wake up Selection

(USB Connector

USB1)

Normal

(Default)

Enable

1 1

Pin No. Definition

1-2 close Rear USB Device Wake up

Enable

2-3 close Rear USB Device Wake up

Disable (Default)

Please note:

(If you want to use “

USB Dev Wakeup from S4~S5

” function, you

have to set the BIOS setting “USB Dev Wakeup from S4~S5” enabled, and the

jumper “

RUSB_ON

”& ”

STR_EN

” enabled).

*(Power on the computer and as soon as memory counting starts, press <Del>.

You will enter BIOS Setup. Select the item “POWER MANAGEMENT SETUP”,

then select “USB Dev Wakeup from S3~S5: Enabled”. Remember to save the

setting by pressing "ESC" and choose the “SAVE & EXIT SETUP” option.)

STR_EN : STR Selection (Optional)

Pin No. Definition

1-2 close STR Enabled

2-3 close STR Disabled (Default)

Disabled

(Default)

Enabled