User Guide

Panel and Jumper Definition
24
Panel And Jumper Definition
F_PANEL : For 2X11 Pins Jumper
RE
GN
GD
PW
P
−
P
−
P+
S P K
HD
1
1
1
1
GN (Green Switch) Open: Normal Operation
Close: Entering Green Mode
GD (Green LED) Pin 1: LED anode(+)
Pin 2: LED cathode(−)
HD (IDE Hard Disk Active
LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(−)
SPK (Speaker Connector) Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(−)
RE (Reset Switch) Open: Normal Operation
Close: Reset Hardware System
P+P−P−(Power LED)
Pin 1: LED anode(+)
Pin 2: LED cathode(−)
Pin 3: LED cathode(−)
PW (Soft Power Connector) Open: Normal Operation
Close: Power On/Off
Please Note:
Please connect the power LED, PC speaker, reset switch and
power switch etc of your chassis front panel to the front panel jumper according
to the pin assignment above.