FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T.
7VMM TM TM AMD Athlon /Duron Socket A Processor Motherboard USER'S MANUAL AMD AthlonTM/DuronTM Socket A Processor Motherboard REV 1.
How This Manual Is Organized This manual is divided into the following sections: 1) Revision List Manual revision information 2) Item Checklist Product item list 3) Features Product information & specification 4) Installation Guide Instructions on CPU & Memory Installation 5) Performance & Block Diagram Product performance & block diagram 6) Suspend to RAM Instructions on STR installation 7) BIOS Flash Utility BIOS Flash utility introduction 8) @BIOS™ & EasyTuneIII™ @BIOS™ & EasyTuneIII™ intr
Table Of Content Revision History P.1 Item Checklist P.2 Feature Summary P.3 7VMM Motherboard Layout P.5 Installation Guide P.6 Page Index for Connectors / Panel and Jumper Definition P.12 Performance List P.29 Block Diagram P.30 Suspend to RAM Installation (Optional) P.31 BIOS Flash Utility Introduction P.37 @BIOSTM Introduction (Optional) P.39 EasyTuneIIITM Introduction (Optional) P.40 Page Index for BIOS Setup P.42 Technical Support /RMA Sheet P.69 Appendix P.
7VMM Motherboard Revision History Revision 1.0 1.0 Revision Note Initial release of the 7VMM motherboard user’s manual. Second release of the 7VMM motherboard user’s manual. Date May.2001 Aug.2001 The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Aug.06, 2001 Taipei, Taiwan, R.O.
Item Checklist Item Checklist ! The 7VMM Motherboard ! Cable for IDE / Floppy device ! Driver CD for motherboard utilities ! 7VMM User’s Manual " Internal COM B Cable (Optional) 2
7VMM Motherboard Features Summary Form Factor Motherboard CPU Chipset 20.6 cm x 24.3 cm Micro ATX size form factor, 4 layers PCB.
Features Summary On-Board Sound On-Board VGA PS/2 Connector BIOS Additional Features #$ #$ #$ #$ #$ #$ #$ #$ #$ #$ #$ #$ #$ #$ AC’97 CODEC Line In / Line Out / Mic In / CD In / Game port TEL / AUX In (Optional) Build Trident Blade 3D Graphics Controller in VT8361 Support Shared memory architecture PS/2 Keyboard interface and PS/2 Mouse interface Licensed AMI BIOS, 2M bit flash ROM Support Wake-On-LAN (WOL) Support Internal / External Modem Ring On Support USB KB/MS Wake up from S3 Includes 3 fan power
7VMM Motherboard 7VMM Motherboard Layout CPU_FAN ATX POWER RUSB_ON USB1 FUSB_ON PS/2 Socket A COM 1 CPU PWR_FAN CLK_JP1 STR_LED IDE1 CD_IN AUX_IN VGA STR_EN IDE2 LPT CLK_JP2 + LED1 VT8361 AMR_EN1 LED2 AMR BAT1 AC97 IR + WOR 7VMM FMIC_EN DIMM2 DIMM1 F_AUDIO FDD Game & Audio COMB WOL BZ1 CLR_CMOS BIOS_WP PCI1 VT82C686B TELE SYS_FAN S_IRQ BIOS PCI3 USB2 ISA1 5 F_PANEL AMR_EN2 AMR_EN3 PCI2
Installation Guide Installation Guide Getting Started WARNING! 1. 2. 3. 4. 5. Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. Unplug your computer when working on the inside. Use a grounded wrist strap before handling computer components.
7VMM Motherboard To set up your computer, you must complete the following steps: Step 1 - Set system jumpers Step 2- Install the Central Processing Unit (CPU) Step 3-Install memory modules Step 4-Install expansion cards Step 5-Connect ribbon cables, cabinet wires, and power supply Step 6-Set up BIOS software Step 7-Install supporting software tools Step 3 Step 2 Step 5 Step 5 Step 4 Step 1 7
Installation Guide CPU Speed Setup The system bus speed is selectable at 100/133MHz. The user can select the system bus speed by JUMPER (CLK_JP1/CLK_JP2). (The frequency ratio depend on CPU). CLK_JP2 1 CLK_JP1 CPU CLK Frequency CLK_JP1 CLK_JP2 1 100MHz 133MHz 2-3 Close 2-3 Close 1-2 Close 1-2 2-Close %AMD CPU Heat Sink Installation: Beware: Please check that the heat sink is in good contact with the CPU before you turn on your system.
7VMM Motherboard CPU Installation Please make sure the CPU should be supported to the motherboard. CPU Bottom View CPU Top View Socket Actuation Lever Blank 1.Pull the lever out and lift it up. 2.The notched corner should be orientated toward the blank space on the socket nearest the lever. The CPU will only fit in the orientation as shown. CPU Heat Sink Installation: Beware: Please check that the heat sink is in good contact with the CPU before you turn on your system.
Installation Guide 3.Align CPU and insert it (Please refer to your heatsink installation manual for application of thermal grease to provide better heat conduction between your CPU and heatsink.) 4.Use compliant fan approved by AMD. 5.Hook one end of the cooler bracket to the CPU socket. 6. Hook the other end of the cooler bracket to the CPU socket.
7VMM Motherboard Memory Installation The motherboard has 2 dual inline memory module (DIMM) sockets support 4 banks. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets. SDRAM 1. The DIMM slot has two notch, so the DIMM 2. Insert the DIMM memory module vertically memory module can only fit in one direction.
Installation Guide Page Index for Connectors/Panel and Jumper Definition Connectors ATX Power AUXIN (AUX_IN) [Optional] COM A / VGA / LPT Port COM B CDIN (CD Audio Line In) CPU_FAN (CPU Fan) Floppy Port F_AUDIO (Front Audio) [Optional] Game & Audio Port IDE1(Primary),IDE2(Secondary)Port IR (IR Header) PWR_FAN (Power Fan) PS/2 Keyboard & PS/2 Mouse Connector SYS_FAN (System 1 Fan) STR_LED/LED1 (STR LED Connector & DIMM LED) [Optional] S_IRQ (Serial IRQ) TELE (TEL) [Optional] USB1 (USB Connector) USB2 (Front
7VMM Motherboard Connectors ATX Power 10 20 1 11 Pin No. 3,5,7,13,15-17 1,2,11 4,6,19,20 10 12 18 8 9 14 Definition GND 3.3V VCC +12V -12V -5V Power Good 5V SB stand by+5V PS-ON(Soft On/Off) Please note: AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. COM A / VGA / LPT Port LPT PORT COM A VGA Please note: This mainboard supports 1 standard COM ports ,1 VGA Port and 1 LPT port.
Connectors PS/2 Keyboard & PS/2 Mouse Connector PS/2 Mouse 5 6 3 4 2 1 PS/2 Keyboard PS/2 Mouse/ Keyboard Pin No. Definition 1 Data 2 NC 3 GND 4 VCC(+5V) 5 Clock 6 NC Please note: This mainboard supports standard PS/2 keyboard and PS/2 mouse interface connector. USB1 : USB Connector 5 6 7 8 1 23 4 Pin No.
7VMM Motherboard USB2 : Front USB Connector 2 10 1 9 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition 5V-SB GND USB D2NC USB D2+ USB D3+ NC USB D3GND 5V-SB Please note: Be careful with the polarity of the front panel USB connector. Check the pin assignment while you connect the front panel USB cable. Please contact your nearest dealer for optional front panel USB cable.
Connectors Game & Audio Port Game Port Line Out 1 MIC In Line In Please note: This motherboard supports standard audio port and game port. After install onboard audio driver. you may connector speaker to line out jack, micro phone to MIC in jack Device like CD-ROM , walkman etc can be connected to line-in jack .
7VMM Motherboard CD_IN : CD Audio Line In 1 Pin No. 1 2 3 4 Definition CD-L GND GND CD-R AUX_IN : AUX_IN (Optional) 1 Pin No.
Connectors TELE : TEL (The connector is for internal modem card with voice connector)(Optional) 1 Pin No. Definition 1 Signal-In 2 GND 3 GND 4 Signal-Out WOR : Ring Power On 1 Pin No.
7VMM Motherboard SYS_FAN : System Fan 1 Pin No. 1 2 3 Definition Control +12V SENSE PWR_FAN : Power Fan 1 Pin No.
Connectors CPU_FAN : CPU Fan 1 Pin No. 1 2 3 Definition Control +12V SENSE Please note: A proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating. WOL : Wake on LAN 1 Pin No.
7VMM Motherboard STR_LED/ LED1 : STR LED Connector & DIMM LED (Optional) STR LED Connector 1 + DIMM LED Please note, Do not remove memory modules while DIMM LED is on. It might cause short or other unexpected damages due to the 3.3V stand by voltage. Remove memory modules only when STR function is disabled by jumper and AC Power cord is disconnected. IR: IR Header 1 Pin No.
Connectors F_AUDIO : Front Audio (Optional) . 1 15 PIN NO. 1 2 Definition Incase speaker (R) Incase speaker (L) 3, 4,5,6,10,15 GND 7 +12V 8,16 NC 2 16 9 MIC 11 Front Audio (R) 13 Front Audio (L) 12 Rear Audio (R) 14 Rear Audio (L) Please Note : If you want to use “Front Audio” connector, you must move 11-12,13-14 Jumper. In order to utilize the front audio header, your chassis must have front audio connector.
7VMM Motherboard S_IRQ : Serial IRQ (For special design, for example: PCMCIA add on card) 1 Pin No.
Panel and Jumper Definition Panel And Jumper Definition F_PANEL : For 2X11 Pins Jumper GD 1 RE PW 1 1 SPK P−P−P+ HD 1 GN GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) SPK (Speaker Connector) RE (Reset Switch) P+P−P−(Power LED) PW (Soft Power Connector) Open: Normal Operation Close: Entering Green Mode Pin 1: LED anode(+) Pin 2: LED cathode(−) Pin 1: LED anode(+) Pin 2: LED cathode(−) Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data(−) Open: Normal Operation Close: Reset Hardware System P
7VMM Motherboard CLR_CMOS : Clear CMOS Function 1 Disable (Default) 1 Clear CMOS Pin No. Definition 1-2 Close Disable Clear CMOS Function (Default) 2-3 Close Enable Clear CMOS Function Please note: You may clear the CMOS data to its default values by this jumper. BIOS_WP : BIOS Write Protect Function 1 Write Protection 1 Disable (Default) Pin No.
Panel and Jumper Definition RUSB_ON: Rear USB Device Wake up Selection (USB Connector & USB1) 1 1 Enable Normal (Default) Pin No. Definition 1-2 close Rear USB Device Wake up Enable 2-3 close Rear USB Device Wake up Disable (Default) Please note: (If you want to use “USB Dev Wakeup from S4~S5” function, you have to set the BIOS setting “USB Dev Wakeup from S4~S5” enabled, and the jumper “RUSB_ON”& ”STR_EN” enabled). *(Power on the computer and as soon as memory counting starts, press .
7VMM Motherboard AMR_EN1/ AMR_EN2/ AMR_EN3 : Onboard AC97& AMR & Audio Modem Riser) (Primary or Secondary ) Select (AMR& AMR_EN2 1 1 AMR_EN1 AMR_EN3 1 Jumper AMR_EN1 AMR_EN2 AMR_EN3 Function 1-2 1-2 1-2 Only AC97 Close Close Close Only AMR 2-3 3-4 3-4 (Primary) Close Close Close AC97+MR 1-2 1-2 1-2 (Secondary) 3-4 Close Close (Default) Close Please note: This MB supports AMR slot, you can look up the table above to choose the appropriate AMR card for your board.
Panel and Jumper Definition FUSB_ON: Front USB Device Wake up Selection (USB Connector & USB2) 1 1 Normal (Default) Enable Pin No. Definition 1-2 close Front USB Device Wake up Enable 2-3 close Front USB Device Wake up Disable (Default) Please note: (If you want to use “USB Dev Wakeup from S4~S5” function, you have to set the BIOS setting “USB Dev Wakeup from S4~S5” enabled, and the jumper “FUSB_ON”&”STR_EN” enabled). *(Power on the computer and as soon as memory counting starts, press .
7VMM Motherboard Performance List The following performance table lists the results of some popular benchmark testing programs. These data are provided as reference only and in no way guarantee the system shall perform, and there is no responsibility for different testing data at exactly the same level. (The different Hardware & Software configuration will result in different benchmark testing results.
Block Diagram Block Diagram CPUCLK (100/133MHz) Socket A System Bus 100/133MHz AGPCLK (66MHz) Display 3.3V SDRAM VT8361 100/133MHz HCLK (100/133MHz) NPCLK (33MHz) AGPCLK (66MHz) 33MHz PCI Bus 33MHz 14.318MHz 48MHz VT82C 686B AC-Link ATA33/66/100 IDE Channels 4 USB Ports AC97 CODEC 3 PCI PS/2 Floppy LPT Port Game Port COM Ports AMR PCI (33MHz) ISA AGPCLK (66MHz) PCI (33MHz) 48MHz HCLK (100/133MHz) ICS 94236 14.
7VMM Motherboard Suspend To RAM Installation (Optional) A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98/ME/2000 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “state” of the system before it went to sleep and recover to that state. The “state” is stored in memory (RAM) before the system goes to sleep.
Suspend to RAM Installation Step 2: (If you want to use STR Function, please set jumper “STR_EN” Pin1-2 (Closed.) 1 1 Disabled (Default) Enabled Pin No. Definition 1-2 close STR Enabled 2-3 close STR Disabled (Default) Step 3: Power on the computer and as soon as memory counting starts, press . You will enter BIOS Setup. Select the item “POWER MANAGEMENT SETUP”, then select “ACPI Standby State : S3 /STR”. Remember to save the settings by pressing "ESC" and choose the “SAVE & EXIT SETUP” option.
7VMM Motherboard A.3 How to put your system into STR mode? (For example : Windows ME) 1. There are two ways to accomplish this: Choose the “Stand by” item in the “Shut Down Windows” area. A. Press the “Start” button and then select “Shut Down” B.
Suspend to RAM Installation 2. Define the system ”power on” button to initiate STR sleep mode: A. Double click “My Computer” and then “Control Panel” B. Double click the “ Power Management” item.
7VMM Motherboard C. Select the “Advanced” tab and “Standby” mode in Power Buttons. D. Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “Power on” button.. A.4 How to recover from the STR sleep mode? There are five ways to “wake up” the system: 1. 2. 3. 4. 5. Press the “Power On” button. Use the “Resume by Alarm” function. Use the “Modem Ring On” function. Use the “Wake On LAN” function. Use the “USB Device Wake Up” function.
Suspend to RAM Installation A.5 Notices : 1. In order for STR to function properly, several hardware and software requirements must be satisfied: A. 2. Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). B. Your SDRAM must be PC-100 compliant. Jumper “STR_LED” is provided to connect to the STR LED in your system chassis. [Some chassis may not provide this feature.] The STR LED will be illuminated when your system is in STR sleep mode.
7VMM Motherboard BIOS Flash Utility Introduction A. How to use BIOS Flash Utility ? a. Boot Screen American Megatrends Release:05/04/2001 AMIBIOS (C) 1999 American Megatrends xxx xxx Check System Health OK, AMD-Athlon(tm) Processor-800MHz Check NVRAM… Wait… Press F1 to enter AMI BIOS Flash Utility. Press any key to contiume Press F1 to enter AMI BIOS Flash Utility ( C ) American Megatrends Inc., 62-0504-001199-00101111-071595-VIA_K7-GA7VMM01-F b. AMI BIOS Flash Utility AMI BIOS Flash Utility V1.
Suspend to RAM Installation c.In the A:drive, insert the “BIOS” diskette, then Press Enter to Run. d.Input BIOS file name in the text box. Press “Enter”. Load XXX.XX Where XXX.XX is name of the BIOS file name. XXX.XX AreLoad you sure to COPY BIOS? [Enter] to Continue Or [Esc] to abort.. Load XXX.XX !! COPY BIOS Completed –Pass !! Please press any key to continue Congratulation! You have completed the flashed and now can restart system.
7VMM Motherboard @ BIOS Introduction (Optional) Gigabyte announces @ BIOS Windows BIOS live update utility Have you ever updated BIOS by yourself? Or like many other people, you just know what BIOS is, but always hesitate to update it? Because you think updating newest BIOS is unnecessary and actually you don’t know how to update it. Maybe not like others, you are very experienced in BIOS updating and spend quite a lot of time to do it. But of course you don’t like to do it too much.
Easy Turn/// Introduction Easy TuneIIITM Introduction (Optional) Gigabyte announces EasyTuneIII Windows overdrive utility “Overdrive” might be one of the most common issues in computer field. But have many users ever tried it? The answer is probably “no”. Because “overdrive” is thought to be very difficult and includes a lot of technical know-how, sometimes “overdrive” is even considered as special skills found only in some enthusiasts.
7VMM Motherboard This wonderful software is now free bundled in Gigabyte motherboard attached driver CD. Users may make a test drive of “EasyTuneIII™” to find out more amazing features by themselves. For further technical information, please link to: http://www.gigabyte.com.tw ! Note: For the latest version of EasyTuneIIITM, please visit our website.
BIOS Setup Page Index for BIOS Setup The Main Menu Standard CMOS Setup BIOS Features Setup Chipset Features Setup Power Management Setup PNP/ PCI Configuration Load Fail-Safe Defaults Load Optimized Defaults Integrated Peripherals Hardware Monitor & MISC Setup Supervisor / User Password IDE HDD Auto Detection Save & Exit Setup Exit Without Saving Page P.44 P.46 P.49 P.51 P.53 P.56 P.58 P.59 P.60 P.64 P.65 P.66 P.67 P.
7VMM Motherboard BIOS Setup BIOS Setup is an overview of the BIOS Setup Interface. The interface allows users to modify the basic system configuration, which is stored in battery-backed CMOS RAM so that it retains the Setup information can be retained when the power is turned off. ENTERING SETUP Power ON the computer and press immediately will allow you to enter Setup. If unsuccessful, you can restart the system and try again by pressing the "RESET" bottom on the system case.
BIOS Setup GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press . The Main Menu (For Example : BIOS Version 7VMM.F2C) Once you enter AMI BIOS CMOS Setup Utility, the Main Menu (Figure 1) will appear on the screen.
7VMM Motherboard • Chipset Features Setup This setup page includes all the adjustable items of chipset special features. • Power Management Setup This setup page includes all the adjustable items of Green function features. • PnP/PCI Configurations This setup page includes all the adjustable configurations of PCI & PnP ISA resources. • Load Fail-Safe Defaults Load Fail-Safe Defaults option loads preset system parameter values to set the system in its most stable configurations.
BIOS Setup Standard CMOS Setup The items in Standard CMOS Setup Menu (Figure 2) are divided into 10 categories. Each category includes none, one or more than one setup items. Use the arrows to highlight the item and then use the or keys to select the value in each item. AMIBIOS SETUP – STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc.
7VMM Motherboard • Primary Master / Slave , Secondary Master / Slave The category identifies the type of hard disk from drive C to F that has been installed in the computer. There are two settings: Auto, and Manual. Manual: HDD type is user-definable; Auto will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
BIOS Setup • Boot Sector Virus Protection If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector or partition table of the hard disk drive. The system will halt and the following error message will appear in the mean time. You can run anti-virus program to locate the problem.
7VMM Motherboard BIOS Features Setup AMIBIOS SETUP – BIOS FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved 1st Boot Device Floppy 2nd Boot Device IDE-0 3rd Boot Device CDROM S.M.A.R.T.
BIOS Setup • Floppy Drive Seek During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks while 720, 1.2 and 1.44 are all 80 tracks. Enabled BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note that BIOS can’t differentiate between from 720, 1.2 or 1.44 drive type as they are all 80 tracks. Disabled BIOS will not search for the type of floppy disk drive by track number.
7VMM Motherboard Chipset Features Setup We would not suggest you change the chipset default setting unless you really need it. AMIBIOS SETUP – CHIPSET FEATURES SETUP ( C ) 1999 American Megatrends, Inc.
• BIOS Setup SDRAM CAS# Latency 2 3 Auto • For Fastest SDRAM DIMM module. For Slower SDRAM DIMM module. Set SDRAM CAS# Latency automatically. (Default Value). AGP Mode Set AGP Mode to 4X. (Default Value) Set AGP Mode to 1X. Set AGP Mode to 2X. 4X 1X 2X • AGP Aperture Size 4MB 8MB 16MB 32MB 64MB 128MB 256MB • Set AGP Aperture Size to 4MB. Set AGP Aperture Size to 8 MB. Set AGP Aperture Size to 16 MB. Set AGP Aperture Size to 32 MB. Set AGP Aperture Size to 64 MB.
7VMM Motherboard Power Management Setup AMIBIOS SETUP – POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc.
BIOS Setup • Display Activity Ignore Monitor • IRQ 3~IRQ15 Ignore Monitor • Delay 4 sec When AC-power back to the system, the system will be in “Off” state. When AC-power back to the system, the system will be in ”On” state. When AC-power back to the system, the system will return to the Last state before AC-power off. (Default Value) Resume On Ring / LAN Disabled Enabled • The user press the power button once, he can turn off the system.
7VMM Motherboard • Resume On RTC Alarm You can set “Resume On RTC Alarm” item to enabled and key in Data/time to power on system. Disabled Enabled Disable this function. (Default Value) Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled.
BIOS Setup PNP/PCI Configuration AMIBIOS SETUP – PNP / PCI CONFIGURATION ( C ) 1999 American Megatrends, Inc.
7VMM Motherboard 7 9 10 11 • The system will reserved IRQ7 for PCI slot 1 / 2 / 3 device if no legacy ISA device using IRQ7. The system will reserved IRQ9 for PCI slot 1 / 2 / 3 device if no legacy ISA device using IRQ9. The system will reserved IRQ10 for PCI slot 1 / 2 / 3 device if no legacy ISA device using IRQ10. The system will reserved IRQ11 for PCI slot 1 / 2 / 3 device if no legacy ISA device using IRQ11.
BIOS Setup Load Fail-Safe Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc.
7VMM Motherboard Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc.
BIOS Setup Integrated Peripherals AMIBIOS SETUP –INTEGRATED PERIPHERAL ( C ) 1999 American Megatrends, Inc.
7VMM Motherboard • OnBoard Serial Port 2 Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled • Serial Port 2 Mode Normal IrDA ASK IR • Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. (Default Value) Normal Operation. Parallel Port DMA 3 1 0 Auto • Set onboard LPT port and address to 378. Set onboard LPT port and address to 278. Set onboard LPT port and address to 3BC. Set onboard LPT port automatically. (Default Value). Disable this function.
BIOS Setup • OnBoard IDE Disabled Both Primary Secondary • OnBoard AC’97 Audio Auto Disabled • Enabled Sound Blaster. Disabled Sound Blaster. (Default Value) SB I/O Base Address 220h-22Fh 280h-28Fh 260h-26Fh 240h-24Fh • Enabled onboard Legacy Audio. (Default Value) Disabled onboard Legacy Audio. Sound Blaster Enabled Disabled • Set onboard MC’97 Modem to Auto. (Default Value) Disabled onboard MC’97 Modem. OnBoard Legacy Audio Enabled Disabled • Set onboard AC’97 Audio to Auto.
7VMM Motherboard • MPU-401 Enabled Disabled • MUP-401 I/O Address 330h-333h 300h-303h 310h-313h 320h-323h • Enabled MPU-401. Disabled MPU-401. (Default Value) Set MUP-401 I/O Address is 330h-333h. (Default Value) Set MUP-401 I/O Address is 300h-303h. Set MUP-401 I/O Address is 310h-313h. Set MUP-401 I/O Address is 320h-323h. Game Port (200h-207h) Disabled Enabled Disabled Game Port (200h-207h). Enabled Game Port (200h-207h).
BIOS Setup Hardware Monitor & MISC Setup AMIBIOS SETUP – HARDWARE MONITOR & MISC SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved CPU Temperature 32°C/89°F System Temperature 32°C/89°F CPU Fan Speed 7123 RPM System Fan Speed 0 RPM Vcore 1.6 V Vdd 3.3 V Vcc3 3.312 V +5.000V 5.030 V +12.000V 11.
7VMM Motherboard Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc.
BIOS Setup IDE HDD Auto Detection AMIBIOS SETUP – STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Tue Jan 18, 2000 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Auto Pri Slave : Auto Sec Master : Auto Sec Slave : Auto Floppy Drive A: 1.
7VMM Motherboard Save & Exit Setup AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc.
BIOS Setup Exit Without Saving AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24e ( C ) 1999 American Megatrends, Inc.
' 7VMM Motherboard Technical Support /RMA Sheet Customer/Country: Company: Contact Person: Phone No.: E-mail Add. : Model name/Lot Number: BIOS version: Hardware Mfs. Configuration PCB revision: O.S./A.S.
Appendix Appendix Appendix A: VIA VT8601/8361 Chipsets Driver Installation Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 2.Click “Next”. 1.Click “VIA 4in 1 Service Pack Driver” item. (2) (1) 4.Click “Next”. 3.Click “Yes”. (4) (3) 6.Click “Finish” to restart computer. 5.Click “Next”.
7VMM Motherboard Appendix B: VT8601/8361 Chipset Drivers Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 2.Click “Next”. 1.Click “VT8601/8361 VGA Driver”. (1) (2) (4) 3.Click “Yes” to complete setup.
Appendix Appendix C: VIA AC’97 Audio Driver Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. Press “Audio” icon. 1.Click “VIA AC’97 Audio Driver”. (2) (1) 3.Click “Finish” to complete setup. 2.Click “Next”. (4) (3) 4. This icon will be shown when driver is completely setup.
7VMM Motherboard Appendix D: BIOS Flash Procedure BIOS update procedure: If your OS is Win9X, we recommend that you used Gigabyte @BIOS Program to flash BIOS. Press “Tools” icon. 2.Click “@BIOS Writer v1.07a”. 1.Click “Gigabyte Utilities”. (2) (1) Click Here. Click “(”. (3) Methods and steps: I. Update BIOS through Internet a. Click "Internet Update" icon b. Click "Update New BIOS" icon c.
Appendix II. Update BIOS NOT through Internet: a. Do not click "Internet Update" icon b. Click "Update New BIOS" c. Please select "All Files" in dialog box while opening the old file. d. Please search for BIOS unzip file, downloading from internet or any other methods (such as: 7VMM.F1). e. Complete update process following the instruction. III. Save BIOS In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the current BIOS version. IV.
7VMM Motherboard Or else you can select flash BIOS in DOS mode. % Please check your BIOS vendor (AMI or AWARD), your motherboard name and PCB version on the motherboard. 1. Format a bootable system floppy diskette by the command “format a:/s” in command mode. 2. Visit the Gigabyte website at http:// www.gigabyte.com.tw , Select the BIOS file you need and download it to your bootable floppy diskette. 3. Insert the bootable diskette containing the BIOS file into the floppy diskette driver. 4.
Appendix Appendix E: EasyTuneIII Utilities Installation Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. Press “Tools” icon. 2.Click “EasyTuneIII Ver.3.3”. 1.Click “Gigabyte Utilities”. (2) (1) 4. Please enter your name and company name, then click “Next”. 3.Click “Next”. (3) (4) 5.Click “Next”. 6.Click “Next”.
7VMM Motherboard 7. Click “Finish” to restart computer.
Appendix Appendix F: Acronyms Acronyms ACPI APM AGP AMR ACR BIOS CPU CMOS CRIMM CNR DMA DMI DIMM DRM DRAM DDR ECP ESCD ECC EMC EPP ESD FDD HDD IDE IRQ I/O IOAPIC ISA LAN LBA LED MHz MIDI MTH MPT NIC OS Meaning Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Audio Communication Riser Basic Input / Output System Central Processing Unit Complementary Metal Oxide Semiconductor Continuity RIMM Communication and Networking Riser Direct Memory Acce
7VMM Motherboard Acronyms OEM PAC POST PCI RIMM SCI SECC SRAM SMP SMI USB VID Meaning Original Equipment Manufacturer PCI A.G.P.