User`s guide

Chapter 2
7
1000 1000MHz 100 10.0 1.75V 256KB 0.18
1100 1100MHz 100 11.0 1.75V 256KB 0.18
1200 1200MHz 100 12.0 1.75V 256KB 0.18
1300 1300MHz 100 13.0 1.75V 256KB 0.18
1400 1400MHz 100 14.0 1.75V 256KB 0.18
1000 1000MHz 133 7.5 1.75V 256KB 0.18
1113 1113MHz 133 8.5 1.75V 256KB 0.18
1200 1200MHz 133 9.0 1.75V 256KB 0.18
1333 1333MHz 133 10.0 1.75V 256KB 0.18
1400 1400MHz 133 10.5 1.75V 256KB 0.18
AMD Athlon XP CPU (Palomino/Thoroughbred)
Model CPU Speed
FSB
Frequency
Multiplier Vcore
L2
Cache
Micron
process
1500+ 1333MHz 133 10.0 1.7V 256KB 0.18
1600+ 1400MHz 133 10.5 1.7V 256KB 0.18
1700+ 1466MHz 133 11.0 1.7/1.6V 256KB 0.18/0.13
1800+ 1533MHz 133 11.5 1.7/1.6V 256KB 0.18/0.13
1900+ 1600MHz 133 12.0 1.7/1.6V 256KB 0.18/0.13
2000+ 1666MHz 133 12.5 1.7/1.6V 256KB 0.18/0.13
2100+ 1733MHz 133 13.0 1.7/1.6V 256KB 0.18/0.13
2200+ 1800MHz 133 13.5 1.65V 256KB 0.13
2400+ 2000MHz 133 15.0 1.65V 256KB 0.13
2600+ 2133MHz 133 16.0 1.65V 256KB 0.13
2600+ 2075MHz 166 12.5 1.65V 256KB 0.13
2700+ 2166MHz 166 13.0 1.65V 256KB 0.13
AMD Athlon XP CPU (Barton)
2500+ 1833MHz 166 11.0 1.65V 512KB 0.13
2600+ 1917MHz 166 11.5 1.65V 512KB 0.13
2800+ 2075MHz 166 12.5 1.65V 512KB 0.13
3000+ 2167MHz 166 13.0 1.65V 512KB 0.13
3000+ 2100MHz 200 10.5 1.65V 512KB 0.13
3200+ 2200MHz 200 11.0 1.65V 512KB 0.13
Chapter 2
8
2-3 Main Memory Configuration
This motherboard provides 3 184pin Double Data Rate (DDR) Dual Inline Memory
Modules (DIMM) slots. Which supports PC 1600/DDR200, PC2100/DDR266,
PC2700/DDR333 and PC3200/DDR400 DDR SDRAM modules up to 3GB.
To support Dual-Channel DDR400 please use an additional VGA card to
prevent the onboard VGA to share the system memory.
Install at least one DIMM module on the slots. Memory modules can be installed on
the slots in any order. You can install either single- or double-sided modules to meet
your own needs. The DDR SDRAM memory system consists three banks and each
bank can support up to 1GB memory size. If you only use one bank it does not
matter which one you use and if you use two or more banks, it does not matter
which bank you install first.
DIMM Module Combination
Install at least one DIMM module on the slots. You can install either single- or
double-sided modules in any order to meet your own needs. Memory modules can
be installed in any combination as follows:
Location
64 MB 128 MB 256 MB 512 MB 1.0 GB
DDR 1 V V V V V
DDR 2 V V V V V
DDR 3 V V V V V
To install your DDR Modules please follow the following steps:
1. Unlock a DIMM socket by pressing the retaining clips outward. The DDR
Modules has only one notch at the center of module. The DDR module will only
fit in the right position.
2. Insert the DDR Module vertically into the DIMM slot, with the correct alignment.
Then push it in until the golden finger on the memory module is deeply inserted
into the socket.
3. The plastic clip on each side of the DIMM slot will automatically close to hold the
DDR Modules in place.
For maximized Dual-channel (128-bit) result, you must install one of your two
memory modules on DDR3.