Manualshelf

User Manual

ManualsBrandsAmcrest ManualsCamera & Photo5MP UltraHD Outdoor Security IP Turret PoE Camera with Mic/Audio, 5-Megapixel, 98ft NightVision, 2.8mm Lens, IP67 Weatherproof, MicroSD Recording (256GB), White (IP5M-T1179EW-28MM)
21222324252627282930
28
address, Subnet Mask, or Default Gateway, as these values are obtained from the DHCP function. To view the current IP address,
DHCP needs to be disabled. Note: When PPPoE is enabled, modification of the IP Address, Subnet Mask, and Gateway becomes
prohibited.
• MAC Address: This field shows the camera’s MAC address, which is unique to this device. This number is read only and is used to
access a local area network (LAN).
• IP Version: This dropdown allows the user to select the IP version. The two options are IPV4 and
IPV6.
• IP Address: This field allows the user to enter a custom IP address.
• Subnet Mask: This field allows the user to enter a custom subnet mask.
• Default Gateway: This field allows the user to enter a custom default gateway.
• Preferred DNS Server: This field allows the user to enter the preferred DNS server
IP address.
• Alternate DNS Server: This field allows the user to enter the alternate DNS server IP address.
• Enable ARP/Ping to set IP Address Service: This checkbox allows the user to enable the ARP/Ping service to change the IP address
service. For more information on this feature, click the help button while on the TCP/IP settings tab.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the settings, click
the Save button.
P2P
The P2P settings screen is where users can use a QR code to connect their smartphone or tablet to the camera. This feature needs to
be enabled for use with the Amcrest View app, Amcrest Cloud, or AmcrestView.com. Below is a screenshot of the P2P settings tab:
Below is an explanation of the fields on the P2P settings tab:
Enable: This checkbox allows the user to enable the P2P feature for the camera. This feature must be enabled for the camera to
connect to a smartphone or tablet via the Amcrest View app. It is enabled by default.
• Status: This field displays the status of the P2P connection. Once the camera is connected to a device, this field should display the
word Online.
• S/N: This field displays the Token ID for the camera. The Token ID can be used to manually enter the camera’s information on a
mobile or tablet device in case the QR code scanning feature cannot be used.
• QR Code: This image is a Quick Response (QR) code. By scanning this image using the Amcrest View app, this camera can establish a
connection with the app.