User Manual

5. Scan the QR code on the back/side/bottom of

the camera or manually enter the camera’s serial

number into the Enter camera S/N (serial number)

field. Press Next to continue.

6. If you are adding a new camera that does not have a

set password the app will automatically detect that a

new camera is being added. Tap OK to proceed.

7. Set a new password for your camera. The password

must be between 8 to 32 characters long and contain

only letters and numbers. When you have finished

setting the password for your camera, enter the

password again in the Confirm Camera Password

section. Tap Next to continue.

8. Confirm and adjust any needed settings for your

camera. When all settings have been confirmed, tap

Finish.

For more information about the Amcrest Cloud app and its features, visit amcrest.com/support